| Author |
Message |
dunnjab

az supporter
Joined: Tue Nov 10, 2009 10:30 pm Posts: 93 Location: Sunshine Coast QLD
Vehicle: 94 Sierra
|
 Posted: Mon Nov 01, 2010 5:10 am |
|
|
Heres the stroy, everytime i get to about 3000rpm it seems to back off and struggle to acclerate after that. Also i can smell some weird smell coming from the engine bay i think.
Some things that might help solve the problem; i was leeking coolant somewhere...i put stop leak in and i think its working also cheaked both dipstick and oil cap for water but all good their.
Also transfercase has a really slow leak, took the filler cap of yesterday and oil was coming out so theres still plenty of oil in there.
Im ablostly stumped now can someone please help!
Its a 94 sierra wt
Cheers James
|
|
|
|
 |
LAY80N
Joined: Tue Jul 28, 2009 11:30 pm Posts: 455 Location: Newcastle NSW
Vehicle: I drive your mum
|
 Posted: Mon Nov 01, 2010 5:13 am |
|
|
Check your ignition timing, and your vacuum advance. Also check that your cam is timed correctly. Make sure that your secondarys are opperating and are hooked up correctly.
Layto....
|
|
|
|
 |
Ridge
Joined: Tue Jun 16, 2009 11:30 pm Posts: 942 Location: Brisbane
Vehicle: sierra leaf sprung buggy
|
 Posted: Mon Nov 01, 2010 5:22 am |
|
|
where is your leak coming from in the transfer?
if it is coming out around one of the flanges, it should just be a seal behind the flange.
_________________ 4age zook ute, in lots of bits
|
|
|
|
 |
dunnjab

az supporter
Joined: Tue Nov 10, 2009 10:30 pm Posts: 93 Location: Sunshine Coast QLD
Vehicle: 94 Sierra
|
 Posted: Mon Nov 01, 2010 5:26 am |
|
Ridge wrote: where is your leak coming from in the transfer? if it is coming out around one of the flanges, it should just be a seal behind the flange.
Yeah it is, but is that why its running like shit?
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Mon Nov 01, 2010 6:07 am |
|
dunnjab wrote: Ridge wrote: where is your leak coming from in the transfer? if it is coming out around one of the flanges, it should just be a seal behind the flange. Yeah it is, but is that why its running like shit?
No, a leaky t-case can't have that sort of effect on performance...
_________________ I want my old sig back 
|
|
|
|
 |
Jccck
Joined: Sun Apr 11, 2010 11:30 pm Posts: 706
|
 Posted: Mon Nov 01, 2010 6:25 am |
|
Ben_Sierra wrote: dunnjab wrote: Ridge wrote: where is your leak coming from in the transfer? if it is coming out around one of the flanges, it should just be a seal behind the flange. Yeah it is, but is that why its running like shit? No, a leaky t-case can't have that sort of effect on performance...
Maybe if it were leaking cement?
Do as Lay8on said, thats the basic troubleshooting
|
|
|
|
 |
waimser
Joined: Wed Sep 15, 2010 10:24 am Posts: 63 Location: SA
|
 Posted: Mon Nov 01, 2010 8:05 am |
|
|
Blocked Cat? Thats what it turned out to be for me.
|
|
|
|
 |
losfer

az supporter
Joined: Fri Mar 30, 2007 11:30 pm Posts: 977
|
 Posted: Mon Nov 01, 2010 9:29 am |
|
|
for one , leak sealer will block your auto choke .
has it always ran a bit rough when first started up in the morning ? this could indicate the vacuum operated part of the choke unloader isnt working , and now with the blocked auto choke , means the choke wont come off at all.
|
|
|
|
 |
Ridge
Joined: Tue Jun 16, 2009 11:30 pm Posts: 942 Location: Brisbane
Vehicle: sierra leaf sprung buggy
|
 Posted: Mon Nov 01, 2010 10:32 am |
|
|
A leaky transfer will not affect engine performance. Try what lay8ton said.
That weird smell you mentioned is probably just oil from the transfer burning on the exhaust.
Im going to guess its the rear out put seal that is leaking? you can get the seal from ripco / super crap for around $10. If you have to change one, you may as well do the rest.
_________________ 4age zook ute, in lots of bits
|
|
|
|
 |
BJPK
Joined: Thu Feb 19, 2009 10:30 pm Posts: 786 Location: perth
|
 Posted: Mon Nov 01, 2010 10:36 am |
|
|
sure its not just the clutch slipping? would explain the wierd smell and lack of acceleration.
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Mon Nov 01, 2010 11:07 am |
|
|
A slipping clutch would be noticable cos it would rev quite freely even if you aren't going anywhere...
_________________ I want my old sig back 
|
|
|
|
 |
BUZOOKA

az supporter
Joined: Sun Aug 30, 2009 11:30 pm Posts: 2659 Location: hobart tasmania
|
 Posted: Mon Nov 01, 2010 11:35 am |
|
i had a similar problem in my sierra checked all my timing and every thing was fine .. turned out to be that my choke was sticking on . once i jammed it open and tyed it off with a bit of wire .. it had more power then it ever had before.. .. but was a little harder to start of a morning .. might be a thing to check out 
_________________ -indebt 4x4 club-
nav 32s n winch cust rear
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Mon Nov 01, 2010 12:42 pm |
|
|
Id be looking at the vacuum secondary, if this is fine, choke and timing.
Secondary actuation first but.
_________________ Bad decisions make good stories.
|
|
|
|
 |
dunnjab

az supporter
Joined: Tue Nov 10, 2009 10:30 pm Posts: 93 Location: Sunshine Coast QLD
Vehicle: 94 Sierra
|
 Posted: Mon Nov 01, 2010 7:45 pm |
|
|
thanks for all the advice guys! its has always ran shit in the morinings so the choke might be it!
Not to sure what the secondary actuation is but im sure my repair manual will help me out.
Cheers again everyone
|
|
|
|
 |
dunnjab

az supporter
Joined: Tue Nov 10, 2009 10:30 pm Posts: 93 Location: Sunshine Coast QLD
Vehicle: 94 Sierra
|
 Posted: Mon Nov 01, 2010 10:03 pm |
|
|
Just checked the choke and it seems to in working order-compltly open when warm.
Could someone please point me in the right direction on how to check the vacuum secondary please.
Also i found a few weeks back that their was small deposits of what looks like black water coming from the exhast would this be a sign of blocked cat?
Cheers James
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Tue Nov 02, 2010 4:41 am |
|
losfer wrote: for one , leak sealer will block your auto choke .
has it always ran a bit rough when first started up in the morning ? this could indicate the vacuum operated part of the choke unloader isnt working , and now with the blocked auto choke , means the choke wont come off at all.
X 2
That leak sealer is nasty, it will block everything up, i had to get a radiator recored after i used it, it was so blocked up... 
|
|
|
|
 |
BJPK
Joined: Thu Feb 19, 2009 10:30 pm Posts: 786 Location: perth
|
 Posted: Tue Nov 02, 2010 9:52 am |
|
Ben_Sierra wrote: A slipping clutch would be noticable cos it would rev quite freely even if you aren't going anywhere...
just re read post..my bad 
|
|
|
|
 |
|