It is currently Sun Jul 26, 2026 6:38 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 17 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Tue Nov 10, 2009 10:30 pm
Posts: 93
Location: Sunshine Coast QLD
Vehicle: 94 Sierra

Post Posted: Mon Nov 01, 2010 5:10 am 
Reply with quote Top  
Heres the stroy, everytime i get to about 3000rpm it seems to back off and struggle to acclerate after that. Also i can smell some weird smell coming from the engine bay i think.

Some things that might help solve the problem; i was leeking coolant somewhere...i put stop leak in and i think its working also cheaked both dipstick and oil cap for water but all good their.

Also transfercase has a really slow leak, took the filler cap of yesterday and oil was coming out so theres still plenty of oil in there.

Im ablostly stumped now can someone please help!

Its a 94 sierra wt

Cheers James

 Profile  

Offline
User avatar

Joined: Tue Jul 28, 2009 11:30 pm
Posts: 455
Location: Newcastle NSW
Vehicle: I drive your mum

Post Posted: Mon Nov 01, 2010 5:13 am 
Reply with quote Top  
Check your ignition timing, and your vacuum advance. Also check that your cam is timed correctly. Make sure that your secondarys are opperating and are hooked up correctly.

Layto....

 Profile  

Offline

Joined: Tue Jun 16, 2009 11:30 pm
Posts: 942
Location: Brisbane
Vehicle: sierra leaf sprung buggy

Post Posted: Mon Nov 01, 2010 5:22 am 
Reply with quote Top  
where is your leak coming from in the transfer?
if it is coming out around one of the flanges, it should just be a seal behind the flange.

_________________
4age zook ute, in lots of bits

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Nov 10, 2009 10:30 pm
Posts: 93
Location: Sunshine Coast QLD
Vehicle: 94 Sierra

Post Posted: Mon Nov 01, 2010 5:26 am 
Reply with quote Top  
Ridge wrote:
where is your leak coming from in the transfer?
if it is coming out around one of the flanges, it should just be a seal behind the flange.


Yeah it is, but is that why its running like shit?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Post Posted: Mon Nov 01, 2010 6:07 am 
Reply with quote Top  
dunnjab wrote:
Ridge wrote:
where is your leak coming from in the transfer?
if it is coming out around one of the flanges, it should just be a seal behind the flange.


Yeah it is, but is that why its running like shit?


No, a leaky t-case can't have that sort of effect on performance...

_________________
I want my old sig back :(

 Profile  

Offline

Joined: Sun Apr 11, 2010 11:30 pm
Posts: 706

Post Posted: Mon Nov 01, 2010 6:25 am 
Reply with quote Top  
Ben_Sierra wrote:
dunnjab wrote:
Ridge wrote:
where is your leak coming from in the transfer?
if it is coming out around one of the flanges, it should just be a seal behind the flange.


Yeah it is, but is that why its running like shit?


No, a leaky t-case can't have that sort of effect on performance...


Maybe if it were leaking cement? :rofl:

Do as Lay8on said, thats the basic troubleshooting

 Profile  

Offline

Joined: Wed Sep 15, 2010 10:24 am
Posts: 63
Location: SA

Post Posted: Mon Nov 01, 2010 8:05 am 
Reply with quote Top  
Blocked Cat? Thats what it turned out to be for me.

 Profile  

Offline
az supporter
az supporter

Joined: Fri Mar 30, 2007 11:30 pm
Posts: 977

Post Posted: Mon Nov 01, 2010 9:29 am 
Reply with quote Top  
for one , leak sealer will block your auto choke .

has it always ran a bit rough when first started up in the morning ? this could indicate the vacuum operated part of the choke unloader isnt working , and now with the blocked auto choke , means the choke wont come off at all.

 Profile  

Offline

Joined: Tue Jun 16, 2009 11:30 pm
Posts: 942
Location: Brisbane
Vehicle: sierra leaf sprung buggy

Post Posted: Mon Nov 01, 2010 10:32 am 
Reply with quote Top  
A leaky transfer will not affect engine performance. Try what lay8ton said.

That weird smell you mentioned is probably just oil from the transfer burning on the exhaust.

Im going to guess its the rear out put seal that is leaking? you can get the seal from ripco / super crap for around $10. If you have to change one, you may as well do the rest.

_________________
4age zook ute, in lots of bits

 Profile  

Offline
User avatar

Joined: Thu Feb 19, 2009 10:30 pm
Posts: 786
Location: perth

Post Posted: Mon Nov 01, 2010 10:36 am 
Reply with quote Top  
sure its not just the clutch slipping? would explain the wierd smell and lack of acceleration.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Post Posted: Mon Nov 01, 2010 11:07 am 
Reply with quote Top  
A slipping clutch would be noticable cos it would rev quite freely even if you aren't going anywhere...

_________________
I want my old sig back :(

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Aug 30, 2009 11:30 pm
Posts: 2659
Location: hobart tasmania

Post Posted: Mon Nov 01, 2010 11:35 am 
Reply with quote Top  
i had a similar problem in my sierra checked all my timing and every thing was fine .. turned out to be that my choke was sticking on . once i jammed it open and tyed it off with a bit of wire .. it had more power then it ever had before.. .. but was a little harder to start of a morning .. might be a thing to check out ;)

_________________
-indebt 4x4 club-

nav 32s n winch cust rear

 Profile  

Offline
User avatar

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Post Posted: Mon Nov 01, 2010 12:42 pm 
Reply with quote Top  
Id be looking at the vacuum secondary, if this is fine, choke and timing.

Secondary actuation first but.

_________________
Bad decisions make good stories.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Nov 10, 2009 10:30 pm
Posts: 93
Location: Sunshine Coast QLD
Vehicle: 94 Sierra

Post Posted: Mon Nov 01, 2010 7:45 pm 
Reply with quote Top  
thanks for all the advice guys! its has always ran shit in the morinings so the choke might be it!
Not to sure what the secondary actuation is but im sure my repair manual will help me out.

Cheers again everyone

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Nov 10, 2009 10:30 pm
Posts: 93
Location: Sunshine Coast QLD
Vehicle: 94 Sierra

Post Posted: Mon Nov 01, 2010 10:03 pm 
Reply with quote Top  
Just checked the choke and it seems to in working order-compltly open when warm.

Could someone please point me in the right direction on how to check the vacuum secondary please.

Also i found a few weeks back that their was small deposits of what looks like black water coming from the exhast would this be a sign of blocked cat?

Cheers James

 Profile  

Offline
az supporter
az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Post Posted: Tue Nov 02, 2010 4:41 am 
Reply with quote Top  
losfer wrote:
for one , leak sealer will block your auto choke .

has it always ran a bit rough when first started up in the morning ? this could indicate the vacuum operated part of the choke unloader isnt working , and now with the blocked auto choke , means the choke wont come off at all.


X 2
That leak sealer is nasty, it will block everything up, i had to get a radiator recored after i used it, it was so blocked up... :roll: :?

 Profile WWW  

Offline
User avatar

Joined: Thu Feb 19, 2009 10:30 pm
Posts: 786
Location: perth

Post Posted: Tue Nov 02, 2010 9:52 am 
Reply with quote Top  
Ben_Sierra wrote:
A slipping clutch would be noticable cos it would rev quite freely even if you aren't going anywhere...

just re read post..my bad :oops:

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours