i don't know, i just copied it straight from the speedy wheels website that i linked.
| auszookers.com http://auszookers.com/forum/ |
|
| How to tell Wheel Offset: Why the diffference? http://auszookers.com/forum/viewtopic.php?f=5&t=16958 |
Page 1 of 1 |
| Author: | Birdman1985 [ Mon Nov 22, 2010 1:13 am ] |
| Post subject: | How to tell Wheel Offset: Why the diffference? |
I thought that this might be a good thread to start. Mainly because im wanting to know my wheel offset. But it has an easy name to search for future reference and im probably not the only person who doesn't know. So...can anyone tell me how you go about finding the offset of a rim? Mitch. |
|
| Author: | atari4x4 [ Mon Nov 22, 2010 1:15 am ] |
| Post subject: | Re: How to tell Wheel Offset. |
| Author: | Built4thrashing [ Mon Nov 22, 2010 3:44 am ] |
| Post subject: | Re: How to tell Wheel Offset. |
Awsome description. B4T |
|
| Author: | alien [ Mon Nov 22, 2010 5:29 am ] |
| Post subject: | Re: How to tell Wheel Offset. |
to follow that up, the most common measurement is centreline, hence you see most rims measuring dia X width -/+XXmm: eg: 15x7 -38 |
|
| Author: | 303zuke [ Mon Nov 22, 2010 7:16 am ] |
| Post subject: | Re: How to tell Wheel Offset. |
| Author: | atari4x4 [ Mon Nov 22, 2010 7:20 am ] |
| Post subject: | Re: How to tell Wheel Offset. |
| i don't know, i just copied it straight from the speedy wheels website that i linked.
|
|
| Author: | Birdman1985 [ Mon Nov 22, 2010 9:12 pm ] |
| Post subject: | Re: How to tell Wheel Offset. |
Thanks guys...never thought i'd ave to do algebra again... So your saying it should measure something like 15x8 -10 or something. Okay ill see how i go. Oh and by the way...anyone want a 15x 9 wheel. Somehow it made its way into my 4 15x8's. So now i need to lose it and find a wheel with my offset. |
|
| Author: | BlueSuzy [ Mon Nov 22, 2010 9:31 pm ] |
| Post subject: | Re: How to tell Wheel Offset. |
Are you sure! For wheel width, are you measureing inside the lip to lip(bead edges), or from the outer rim edges.. |
|
| Author: | Birdman1985 [ Wed Nov 24, 2010 5:46 am ] |
| Post subject: | Re: How to tell Wheel Offset. |
I just roughly measured the width of the whole rim. But it does say on the side ROH 15x9 or something faded like that and sits a good half inch higher/wider than my other ones. |
|
| Author: | Birdman1985 [ Wed Nov 24, 2010 6:42 am ] |
| Post subject: | Re: How to tell Wheel Offset. |
Okay, i just measured my wheels. 15x8 with a -10mm offset. The 4th wheel, width when measured from edge to edge (width) measures at an even 9inches. It has a -5mm offset. So, anyone got a spare 15x8 sunny with -10 offset???  
Mitch. |
|
| Author: | Birdman1985 [ Sat Nov 27, 2010 4:06 am ] |
| Post subject: | Re: How to tell Wheel Offset: Why is there are a larger gap? |
Okay. So i put these rims i have been enquiring about on the front end of the Jimny to make sure they fit (15x8). They do.... ...but the wierd thing is that on the drivers side there is a smaller gap at the rear of the tyre compared to the front, and on the passenger there is a smaller gap at the front. I took them for a spin and i had scrubbing in the afformentioned regions; rear of drivers and front of passengers. Anyone ever seen this? Or is my car retarded like the owner. I really dont want to go to a smaller sized wheel, 235's are schmicko. Mitch. |
|
| Author: | alien [ Sat Nov 27, 2010 4:14 am ] |
| Post subject: | Re: How to tell Wheel Offset: Why the diffference? |
perhaps the body is a little twisted? or are your springs in back to front? (ie: swap drivers and passengers). |
|
| Author: | mighty_vites [ Wed Dec 08, 2010 9:35 am ] |
| Post subject: | Re: How to tell Wheel Offset: Why the diffference? |
is -25 too much offset for a sierra running 15x8 rims? or should -10 be a more realistic choice (i will be extending my flares) and am looking to run some 30x9.5 tires |
|
| Author: | alien [ Wed Dec 08, 2010 9:54 am ] |
| Post subject: | Re: How to tell Wheel Offset: Why the diffference? |
wider the better really... just make sure your wheel bearings are lubed and adjusted (front). |
|
| Author: | atari4x4 [ Wed Dec 08, 2010 10:03 am ] |
| Post subject: | Re: How to tell Wheel Offset: Why the diffference? |
alien wrote: wider the better really... just make sure your wheel bearings are lubed and adjusted (front).
scrub radius? 
|
|
| Author: | alien [ Wed Dec 08, 2010 10:12 am ] |
| Post subject: | Re: How to tell Wheel Offset: Why the diffference? |
meh... i reckon mine steers better now with -38 than it did with -15... i think because the wheel rolls more to turn its making the steering faster because its easier to move. |
|
| Author: | mighty_vites [ Wed Dec 08, 2010 10:21 am ] |
| Post subject: | Re: How to tell Wheel Offset: Why the diffference? |
so i might as well just get standard rims and flip them? |
|
| Author: | alien [ Wed Dec 08, 2010 12:16 pm ] |
| Post subject: | Re: How to tell Wheel Offset: Why the diffference? |
standard ar 15x5.5 - not the best to run a larger tyre on... 15x7 will cover you up to 10.5" wide... and you can get BFG KM2 in 33x10.5r15 now, so a 15x7 will do you up to at least that (unless you go 34x9.5 swampers). |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|