i have 2" efs rears alround
some more pics here
http://www.auszookers.com/index.php?nam ... &start=120
| auszookers.com http://auszookers.com/forum/ |
|
| 2" efs rears all round anyone got em? http://auszookers.com/forum/viewtopic.php?f=5&t=17076 |
Page 1 of 1 |
| Author: | birko [ Fri Nov 26, 2010 7:40 am ] |
| Post subject: | 2" efs rears all round anyone got em? |
Hey, I need some new springs soon as was wondering if anyone got some pics of efs 2" rears all round. Im wondering if i should order 2" rears for the front and 3" rears for the back so it all sits level. Both ends have extended shackles but the rears are about a 1" extended while the fronts are 2" extended. cheers |
|
| Author: | alex [ Fri Nov 26, 2010 8:49 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
i have 2" efs rears alround
some more pics here http://www.auszookers.com/index.php?nam ... &start=120 |
|
| Author: | hooki [ Fri Nov 26, 2010 10:49 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
i put the 65mm lifted rears all around with 2 inch extended shackles front and rear. I ended up having to remove heaps of leafs to get the rear to flex. front works good though. Car site pretty level with this setup. |
|
| Author: | birko [ Fri Nov 26, 2010 11:16 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
ok, so im thinking a 2" all round will be ok. i might just get the front first and see how its sits. Ive currently got flatened 2" rears and stnd rears up front, and its sits slightly lower at the front |
|
| Author: | birko [ Fri Nov 26, 2010 11:16 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
How many leafs is heaps? 2? |
|
| Author: | alex [ Fri Nov 26, 2010 11:19 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
birko wrote: How many leafs is heaps? 2?
i run 3 at the start and then put the 4th in when they sofen up a lil. and i get a lil axel tramp with 4 springs thats with 6.5 and 1.6 they wont last long with 2 
|
|
| Author: | hooki [ Fri Nov 26, 2010 1:58 pm ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
yeah same, I ran 3 until they got soft. If you leave them with the 3 they will go flat pretty fast. Apparently the efs springs are longer than the other brands which is good aswell. |
|
| Author: | MrRocky [ Sat Nov 27, 2010 2:29 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
i got 3 in the front, thinking of adding another on the drivers side only to even up the lean. |
|
| Author: | alien [ Sat Nov 27, 2010 3:10 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
mick - use an old leaf or two cut down to the length of the perch to act as a spacer on the spring - this will stop one side being stiffer than the other =) |
|
| Author: | Joe [ Sat Nov 27, 2010 3:18 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
alien wrote: Mick - use an old leaf or two cut down to the length of the perch to act as a spacer on the spring - this will stop one side being stiffer than the other =)
Fixed 
|
|
| Author: | MrRocky [ Sat Nov 27, 2010 3:41 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
drivers side seems to be way softer/flexier anyway particularly when cornering at speed, i would prefer it to match the passenger side for stiffness. I could always throw the 5" lifted calmini's in the front from the bluezuk  no danger of sagging there
dont think my spine would survive though. |
|
| Author: | alien [ Sat Nov 27, 2010 3:45 am ] |
| Post subject: | Re: 2" efs rears all round anyone got em? |
can you just run the main leaf from the calmini kit? mix and match a little... im pretty sure that the cal leaves are longer, so if you run the main leaf only with your current other leaves you should get some more flex =) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|