| auszookers.com http://auszookers.com/forum/ |
|
| X-90 gayness http://auszookers.com/forum/viewtopic.php?f=5&t=17143 |
Page 1 of 1 |
| Author: | Damo [ Mon Nov 29, 2010 10:36 am ] |
| Post subject: | X-90 gayness |
Has anyone bought tune up parts (rotor, rotor cap, leads) for their X90? Bet ya have a sore bum after it! It's genuine only as far as I know, and that's why they are expensive. I guess you might be able to get the leads aftermarket, dunno where from though. Ideas!? |
|
| Author: | Joe [ Mon Nov 29, 2010 10:39 am ] |
| Post subject: | Re: X-90 gayness |
I thought they would be the same as a vitara |
|
| Author: | Damo [ Mon Nov 29, 2010 10:42 am ] |
| Post subject: | Re: X-90 gayness |
Joe wrote: I thought they would be the same as a vitara
X-90 has a different dizzy which has the coil, ignitor, hall sensor and chopper wheel and rotor all in the one assembly. Suzistore lists the rotor button at $66, the cap at $77 and the lead set at $110 |
|
| Author: | Joe [ Mon Nov 29, 2010 10:44 am ] |
| Post subject: | Re: X-90 gayness |
Damo wrote: Joe wrote: I thought they would be the same as a vitara X-90 has a different dizzy which has the coil, ignitor, hall sensor and chopper wheel and rotor all in the one assembly. Suzistore lists the rotor button at $66, the cap at $77 and the lead set at $110 Would ya be able to swap the dizzy over to a vitara one |
|
| Author: | Damo [ Mon Nov 29, 2010 10:57 am ] |
| Post subject: | Re: X-90 gayness |
Joe wrote: Damo wrote: Joe wrote: I thought they would be the same as a vitara X-90 has a different dizzy which has the coil, ignitor, hall sensor and chopper wheel and rotor all in the one assembly. Suzistore lists the rotor button at $66, the cap at $77 and the lead set at $110 Would ya be able to swap the dizzy over to a vitara one The Vit dizzy will fit but the wiring and ECU are different. I want cheaper parts not more work to do |
|
| Author: | Fatzook [ Mon Nov 29, 2010 10:58 am ] |
| Post subject: | Re: X-90 gayness |
Joe wrote: Damo wrote: Joe wrote: I thought they would be the same as a vitara X-90 has a different dizzy which has the coil, ignitor, hall sensor and chopper wheel and rotor all in the one assembly. Suzistore lists the rotor button at $66, the cap at $77 and the lead set at $110 Would ya be able to swap the dizzy over to a vitara one Maybe. But you'd need an external igniter then. |
|
| Author: | Ben_Sierra [ Mon Nov 29, 2010 11:34 am ] |
| Post subject: | Re: X-90 gayness |
I just can't believe its taken you this long to realise that x-90s are gay! |
|
| Author: | royce [ Mon Nov 29, 2010 7:39 pm ] |
| Post subject: | Re: X-90 gayness |
mines the same and its not an X90, makes me less gay than you http://www.rockauto.com/catalog/raframecatalog.php rotor and cap kit is $20ish, lead kit is $30, add $30 for 3 day Fedex freight and youll have enough change to buy me a beer |
|
| Author: | Damo [ Mon Nov 29, 2010 7:58 pm ] |
| Post subject: | Re: X-90 gayness |
royce wrote: mines the same and its not an X90, makes me less gay than you
http://www.rockauto.com/catalog/raframecatalog.php rotor and cap kit is $20ish, lead kit is $30, add $30 for 3 day Fedex freight and youll have enough change to buy me a beer That's exactly what I was looking for, thanks Royce
I'll buy you a beer, but i'd have to invoice you for router rental |
|
| Author: | royce [ Mon Nov 29, 2010 8:00 pm ] |
| Post subject: | Re: X-90 gayness |
you could buy a working MAF while your there though cap and rotor are if it aint broken dont fix it stuff I reckon |
|
| Author: | Damo [ Mon Nov 29, 2010 8:26 pm ] |
| Post subject: | Re: X-90 gayness |
royce wrote: you could buy a working MAF while your there
though cap and rotor are if it aint broken dont fix it stuff I reckon I wonder if their remanufactured MAFs are factory parts. The posts on the dizzy cap are looking quite eaten away. It's still running OK, but i'll have to replace it eventually. I do need a set of leads though. |
|
| Author: | 5ierra [ Mon Nov 29, 2010 8:52 pm ] |
| Post subject: | Re: X-90 gayness |
My understanding was that the 97 vitara had the same engine as the x90, was told that was what 1.6 i have in my sierra. |
|
| Author: | Damo [ Mon Nov 29, 2010 9:08 pm ] |
| Post subject: | Re: X-90 gayness |
5ierra wrote: My understanding was that the 97 vitara had the same engine as the x90, was told that was what 1.6 i have in my sierra.
I would be inclined to believe that. |
|
| Author: | royce [ Mon Nov 29, 2010 9:19 pm ] |
| Post subject: | Re: X-90 gayness |
my jan 96 Vit has the same engine as well Damo, per my post in teh other thread, the Beck Arnley brand MAF from there looks like it came from the same factory as Suzuki, made in Japan, every little detail spot on the same |
|
| Author: | Sassy_X90 [ Sun Aug 28, 2011 5:47 pm ] |
| Post subject: | Re: X-90 gayness |
X-90 gayness 09 - OMG!! I hope 2 years later we have matured a little ...next the MX5 will b considered out'ed ...good greif ppl... grow up. The distributer & rotor for a X90 are a little dearer than the standard Vitara bits - but not much - china knock offs are available under $50 - others a little more... |
|
| Author: | Damo [ Sun Aug 28, 2011 8:27 pm ] |
| Post subject: | Re: X-90 gayness |
Sassy_X90 wrote: X-90 gayness 09 - OMG!! I hope 2 years later we have matured a little ...next the MX5 will b considered out'ed ...good greif ppl... grow up.
The distributer & rotor for a X90 are a little dearer than the standard Vitara bits - but not much - china knock offs are available under $50 - others a little more... |
|
| Author: | Cozook [ Sun Aug 28, 2011 9:21 pm ] |
| Post subject: | Re: X-90 gayness |
What do you get when you put two magicians in an x-90? Poof! |
|
| Author: | Scrawny [ Sun Aug 28, 2011 10:19 pm ] |
| Post subject: | Re: X-90 gayness |
Cozook wrote: What do you get when you put two magicians in an x-90?
Poof! Bwahahahaha!!!! |
|
| Author: | Cozook [ Mon Aug 29, 2011 8:14 am ] |
| Post subject: | Re: X-90 gayness |
If you push an x90 from behind i bet it pushes back! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|