The price is right, but the front may still need to be moved froward a lil bit.
Mr Fat said he was going to make one.............
| auszookers.com http://auszookers.com/forum/ |
|
| bolt-on RUF http://auszookers.com/forum/viewtopic.php?f=5&t=17302 |
Page 1 of 1 |
| Author: | Rossco [ Sun Dec 05, 2010 5:36 pm ] |
| Post subject: | bolt-on RUF |
anyone ever use one of these? http://www.rocky-road.com/ruf.html |
|
| Author: | steak_knife [ Sun Dec 05, 2010 7:32 pm ] |
| Post subject: | Re: bolt-on RUF |
The price is right, but the front may still need to be moved froward a lil bit. Mr Fat said he was going to make one.............
|
|
| Author: | want33s [ Sun Dec 05, 2010 7:34 pm ] |
| Post subject: | Re: bolt-on RUF |
RRO is a shitfight to deal with. Lowrange do a very similar kit and are much better with customer service. |
|
| Author: | Rossco [ Sun Dec 05, 2010 7:45 pm ] |
| Post subject: | Re: bolt-on RUF |
true, I like the idea of the bolt on because it can be removed for a roadworthy if need me. to be honest I think I'll wait until fatzook does one, will probably be better quality then anything on the market. |
|
| Author: | steak_knife [ Sun Dec 05, 2010 7:52 pm ] |
| Post subject: | Re: bolt-on RUF |
I think you should remind him in the TSOR thread in chat..  
I think he's sick of me asking for one.. 
|
|
| Author: | Choppy [ Sun Dec 05, 2010 9:45 pm ] |
| Post subject: | Re: bolt-on RUF |
Ive been asking too, had a chat with him yesterday. He said its difficult to supply a "kit" without supplying springs as you cant guarantee it will work properly/ too its full potential as individuals will all be using different length and load rated springs. makes sense to me. However he is going to give us a hand with my set up after some measurments are taken. |
|
| Author: | lump_a_charcoal [ Sun Dec 05, 2010 10:04 pm ] |
| Post subject: | Re: bolt-on RUF |
want33s wrote: RRO is a shitfight to deal with.
Lowrange do a very similar kit and are much better with customer service. This. |
|
| Author: | Choppy [ Sun Dec 05, 2010 10:50 pm ] |
| Post subject: | Re: bolt-on RUF |
hadnt seen this before, i like the idea what do people rekon? http://www.lowrangeoffroad.com/suzuki/s ... parts.html |
|
| Author: | Fatzook [ Sun Dec 05, 2010 11:08 pm ] |
| Post subject: | Re: bolt-on RUF |
Choppy wrote: hadnt seen this before, i like the idea what do people rekon? http://www.lowrangeoffroad.com/suzuki/s ... parts.html
If you read through the 1000's of posts about missing link on Pirate, they pretty much all say that its "THE SHIT" off-road, but on-road is "SCAREY". So if you can believe the yanks, and you do alot of road driving, perhaps missing link aint the go. 
|
|
| Author: | thompson_2986 [ Mon Dec 06, 2010 2:16 am ] |
| Post subject: | Re: bolt-on RUF |
Have ordered the RUF bolt-on kit about two weeks ago so hopefully should be here soon and yes I'll post pics and review when done. Cheers |
|
| Author: | chris_mac [ Mon Dec 06, 2010 5:32 am ] |
| Post subject: | Re: bolt-on RUF |
i have that kit since quite a while, i don't like the idea of missing link that's why i went with rra kit not the low range off road. rra kit has it's pros and cons, but i'm happy with it so far kris here's link where i wrote more about the kit: http://auszookers.com/index.php?name=Fo ... c&start=30 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|