last thread about this the common fix was a piece of tube the diameter of the top of the carby and same thickness as the bodylift between the carb and hat, with a longer bolt on there to hold it down
| auszookers.com http://auszookers.com/forum/ |
|
| Better air flow http://auszookers.com/forum/viewtopic.php?f=5&t=18962 |
Page 1 of 1 |
| Author: | nato78 [ Wed Feb 09, 2011 5:12 am ] |
| Post subject: | Better air flow |
After putting a body lift in the Sierra, I've noticed that the flexible tubing between the airbox and the carby is at a pretty severe angle, and the tubing has flattened out a bit. I'm assuming that this will be restricting airflow quite a bit. How has everyone else sorted out this problem? |
|
| Author: | royce [ Wed Feb 09, 2011 5:24 am ] |
| Post subject: | Re: Better air flow |
last thread about this the common fix was a piece of tube the diameter of the top of the carby and same thickness as the bodylift between the carb and hat, with a longer bolt on there to hold it down
|
|
| Author: | nato78 [ Wed Feb 09, 2011 9:40 am ] |
| Post subject: | Re: Better air flow |
Cheers Royce, that was pretty much what we came up with, but didn't measure to see if there will be any clearance issues between the hat and bonnet, does anyone know if there will be? |
|
| Author: | royce [ Wed Feb 09, 2011 10:09 am ] |
| Post subject: | Re: Better air flow |
bodylift means your bonnet is further away from your engine now by the same amount you are spacing it up 
|
|
| Author: | nato78 [ Wed Feb 09, 2011 10:41 am ] |
| Post subject: | Re: Better air flow |
royce wrote: bodylift means your bonnet is further away from your engine now by the same amount you are spacing it up
 Somebody just slap me
|
|
| Author: | Blake11254 [ Thu Feb 10, 2011 11:20 am ] |
| Post subject: | Re: Better air flow |
I have Lifted it 2inches of body will i be affected? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|