| auszookers.com http://auszookers.com/forum/ |
|
| Vitara hubs..Springs Rebuildable? http://auszookers.com/forum/viewtopic.php?f=5&t=18974 |
Page 1 of 1 |
| Author: | gregwatkins75 [ Wed Feb 09, 2011 9:58 am ] |
| Post subject: | Vitara hubs..Springs Rebuildable? |
Ok sorry if its mentioned else were, Ive just completed a marathon 9 hour front end rebuild, Bearings bushes brakes balljoints and associated bits and pieces( secrect code for cant be fu.....dd reading thorough a million post in search mode), in search of a thud noise and a wheel wobble, MUCH TO MY HAPPINESS ALL PROBLEMS ARE GONE, though at the moment I am a 2WD only vitara as the spings broke in the locking hubs. Question: can you replace the springs, or rebuild the hubs( hope you guys get what Im talking bout) If so where can I get the springs from? Whats the procedure for replacing the hubs with aftermarket? $, modifications needed to fit? PS , think It was CHOP, LWB vit greyish shovel on rook rack... YOU WERE JUST SPOTTED going into the AIRPORT, COOL RIDE BUDDY |
|
| Author: | royce [ Wed Feb 09, 2011 10:01 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
you mean the big one? let me guess the bits come off the end and now you cant figure out whats going on there are 2 springs, one that puts tension on the locking dog and another thats more like a circlip that holds it together Cant explain how it goes, you either have the knack or not i'm afraid |
|
| Author: | atari4x4 [ Wed Feb 09, 2011 10:06 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Greg, I might have a few spare springs kicking around. Is it the larger or smaller spring? The factory AISIN hubs are probably the best you can get. Have a look at this link. http://www.off-road.com/offroad/article ... ?id=399668 :EDIT: I hope that link works... stupid slow mobile internets You can rape the springs out of most of the AISIN Free Wheeling Hubs eg Toyota's & I think Mitsubishi & Izuzu etc. |
|
| Author: | gregwatkins75 [ Wed Feb 09, 2011 10:09 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Oh, its two springs in there? shit I though that they had snapped, it is rusted to buggery, the one that controlled the winding in and out of the lock mechanism........ I think, Shit didnt realise it was two springs!! Im pretty sure either way royce that they are PHUKED, metal shouldnt be that rusty........ |
|
| Author: | gregwatkins75 [ Wed Feb 09, 2011 10:10 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
OH it was CHOP at the airport tooo... nice lookin one ! he got |
|
| Author: | gregwatkins75 [ Wed Feb 09, 2011 10:12 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
ATARI link is dead |
|
| Author: | atari4x4 [ Wed Feb 09, 2011 10:12 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
search the net for "Aisin Hub Rebuild" |
|
| Author: | Chop [ Wed Feb 09, 2011 10:13 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Yeah that was me going to the airport, went and picked up the girlfriend Were you in yours? i didnt see |
|
| Author: | gregwatkins75 [ Wed Feb 09, 2011 10:18 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
NAH !! I was in the new M3 that was behind you.....spoilt mates car..lol |
|
| Author: | Polar_Bear [ Wed Feb 09, 2011 10:20 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Chop wrote: Were you in yours? i didnt see
nah, his isnt going, probably in the rent-a-car...fawk that thing flies |
|
| Author: | gregwatkins75 [ Wed Feb 09, 2011 10:36 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
was droppin the renter back then a mate picked me up as he had his Nice M3 wish I had one of them, saw Chop and did a quick look back at his.. MINES GOING just its 2wd............. |
|
| Author: | atari4x4 [ Wed Feb 09, 2011 12:02 pm ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
does your broken spring look like that? |
|
| Author: | gregwatkins75 [ Wed Feb 09, 2011 7:39 pm ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
LOL yes it did, Then I bent and cut the larger of the two.................. Well I have had a good look at it, need to get a replacement larger spring as I have one good big one and the two small ones are still ok...................... Then work out how to get them back together and working so I can go for a beach run......mmm FISHING |
|
| Author: | Westie [ Wed Feb 09, 2011 9:24 pm ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Yes you need a new spring. NOTE the way the pother on is fitted IF you have not removed it. they have a slot that the spring sits in inside the retainer where the one is broken Look before you leap my friend also ask before you cut. Rusty springs and a wire brush on a bench grinder works better. |
|
| Author: | atari4x4 [ Thu Feb 10, 2011 12:43 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Eastside Vitara Wreckers has what you're after Greg...
Shoot me a message when you're leaving work... Driveway service is open til 10.30pm. Pretty sure the price scanned as 2 Farmers Union Iced Coffee's
|
|
| Author: | Microwire [ Thu Feb 10, 2011 12:52 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
atari4x4 wrote: Eastside Vitara Wreckers has what you're after Greg... Tell you what, your all a bunch of fkn top blokes.
![]() Shoot me a message when you're leaving work... Driveway service is open til 10.30pm. Pretty sure the price scanned as 2 Farmers Union Iced Coffee's ![]() |
|
| Author: | Westie [ Thu Feb 10, 2011 2:37 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
We all know we are Tops we drive Zooks |
|
| Author: | RIKSTR [ Thu Feb 10, 2011 3:09 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
gregwatkins75 wrote: NAH !! I was in the new M3 that was behind you.....spoilt mates car..lol
Wasn't this was it
|
|
| Author: | gregwatkins75 [ Thu Feb 10, 2011 7:38 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
not good blokes FUCKING LEDGENDS!!!!! all of them especially ATARI and POLAR BEAR.......... Cheers for your help, I can now wheel in safety of knowing I have almost fixed repaired everything bar the clutch that moves or squeaks. |
|
| Author: | atari4x4 [ Thu Feb 10, 2011 7:42 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
mmmm Iced Cofffeeeee
hope it all goes back together smoothly. |
|
| Author: | stocker [ Thu Feb 10, 2011 7:43 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Just so you know, i priced a brand new set of Manual Hubs from ARB and they weren't that expensive... the dude at ARB Penrith quoted me 140 for the Pair. he even said he'd install them for me... i realise that its only 5 or 6 bolts to remove and replace them. but hey... |
|
| Author: | gregwatkins75 [ Thu Feb 10, 2011 7:44 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
JUST READING THE GUIDE I FOUND NOW..............Then going to read it again three more times to make sure! |
|
| Author: | Polar_Bear [ Thu Feb 10, 2011 8:07 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
atari4x4 wrote: mmmm Iced Cofffeeeee
![]() hope it all goes back together smoothly.
oh yeah, i forgot to tell you... i drink iced coffee too |
|
| Author: | gregwatkins75 [ Thu Feb 10, 2011 8:37 am ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
its the juice of life.... u want strong reg or light/? |
|
| Author: | gregwatkins75 [ Fri Feb 11, 2011 10:11 pm ] |
| Post subject: | Re: Vitara hubs..Springs Rebuildable? |
Thanks to Atari for the spring. After searching the net for a few hours I came across this : www.capeoutdoorsports.co.za/.../ Asian%20hubs%20%20Identification%20and%20rebuildin.pdf Read it three times after some advice from ROYCE YIPEEE 4wd again! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|