auszookers.com
http://auszookers.com/forum/

Tyre Clearence
http://auszookers.com/forum/viewtopic.php?f=5&t=19616		 Page 1 of 1
Author:  DRK_ZOOK [ Tue Mar 01, 2011 9:48 pm ]
Post subject:  Tyre Clearence
I need to move my front diff foward about an inch to give more clearence from the fire wall im running 31x10.5x15 MT117 extremes with neg 25 off set rims on a sj70 with 2 inch body and what i think is 2 inch old man emu springs, Whats the easiest way to do this?
Author:  SuziBlu [ Tue Mar 01, 2011 10:08 pm ]
Post subject:  Re: Tyre Clearence
I have no personal knowledge of these but I was thinking about trying them, plans changed, so no need.

They may well be a viable answer.
Author:  CairnsZook [ Tue Mar 01, 2011 10:12 pm ]
Post subject:  Re: Tyre Clearence
Yep, they would work. Or you can pull the whole diff out and drill holes in the perches.
As stated in this thread, don't go too far forward. :wink:
Author:  DRK_ZOOK [ Tue Mar 01, 2011 10:39 pm ]
Post subject:  Re: Tyre Clearence
i was told you could run rear springs in the front and this would move the diff foward about an inch is this true?
Author:  5ierra [ Wed Mar 02, 2011 12:18 am ]
Post subject:  Re: Tyre Clearence
DRK_ZOOK wrote:
i was told you could run rear springs in the front and this would move the diff foward about an inch is this true?



:stekky: YEP.

Alot of work involved for something that sounds so simple though... do a search on RUF (rear up front). There is about over9000 threads on here regarding it as its one of the most popular suspension mods for Sierras.
Author:  lockdup [ Wed Mar 02, 2011 12:54 am ]
Post subject:  Re: Tyre Clearence
As ^^^^. RUF :stekky:
Author:  OMalley [ Wed Mar 02, 2011 6:09 am ]
Post subject:  Re: Tyre Clearence
can you run 31" x 10.5 r15's with OME 45mm lifted fronts? and not RUF?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/