| auszookers.com http://auszookers.com/forum/ |
|
| jimny lockright part number. http://auszookers.com/forum/viewtopic.php?f=5&t=20424 |
Page 1 of 1 |
| Author: | suzkboy [ Mon Mar 28, 2011 7:11 am ] |
| Post subject: | jimny lockright part number. |
i am going to be ordering one of these from the states soon cos the dolar is so good. so i just want the part number off the box from someone if they have it so i can make sure the supplier has the right one. Cheers Dave
|
|
| Author: | krunchi [ Mon Mar 28, 2011 7:18 am ] |
| Post subject: | Re: jimny lockright part number. |
Does any one know the lockrite that will fit the front of a jimny? Also in the rear how are they on wet roads? |
|
| Author: | monley [ Mon Mar 28, 2011 7:24 am ] |
| Post subject: | Re: jimny lockright part number. |
The sierra front auto locker will fit in the back of the jimny, but the only auto locker for the front i can find is in a add of a4wd actoin mag by lock rite, but they have no part number, and they don't have listing on there site. Best thing to do is send them a e-mail. |
|
| Author: | suzkboy [ Mon Mar 28, 2011 7:24 am ] |
| Post subject: | Re: jimny lockright part number. |
i do know there the same for front and back due to the diffs being the same and if you have driven a car with a locked or welded diff it will drive like that under power most of the time. |
|
| Author: | monley [ Mon Mar 28, 2011 7:27 am ] |
| Post subject: | Re: jimny lockright part number. |
I have not, but smiffkid has one in the back, and he reckons it's not that bad, you will just need to adjust your driving style a bi. Also from what i have read you will hate it at first but then you will get use to it. |
|
| Author: | suzkboy [ Mon Mar 28, 2011 7:30 am ] |
| Post subject: | Re: jimny lockright part number. |
yeah im arfter the part no. so i can get one |
|
| Author: | monley [ Mon Mar 28, 2011 7:32 am ] |
| Post subject: | Re: jimny lockright part number. |
How much are they from the states? http://dgtuning.com/ They have a listing for it. S0202037 Dose that part number look about right? |
|
| Author: | suzkboy [ Mon Mar 28, 2011 7:34 am ] |
| Post subject: | Re: jimny lockright part number. |
i got quoted 259 us deliverd the other week so it should be good now seeing our $ gets 102.4 us cents today |
|
| Author: | suzkboy [ Mon Mar 28, 2011 7:37 am ] |
| Post subject: | Re: jimny lockright part number. |
monkey wrote: How much are they from the states?
http://dgtuning.com/ They have a listing for it. S0202037 Dose that part number look about right? thats there part number listing on dgtuning if you have a look at the other items i think ill pm smiffkid |
|
| Author: | monley [ Mon Mar 28, 2011 7:39 am ] |
| Post subject: | Re: jimny lockright part number. |
suzkboy wrote: monkey wrote: How much are they from the states? http://dgtuning.com/ They have a listing for it. S0202037 Dose that part number look about right? thats there part number listing on dgtuning if you have a look at the other items i think ill pm smiffkid Ok. I didn't look at any thing else. |
|
| Author: | smiffkid [ Mon Mar 28, 2011 8:50 am ] |
| Post subject: | Re: jimny lockright part number. |
mine is a lockwright, its a rear sierra locker, in the wet its fine as long as u dnt dump the clutch or stab the accelerator on the corners, mind u im also running 31s, bit hard to drive at the start but u get used to it, i think i blew mine up last night, but i sort of over loaded, i was towing a car trailer on the bitchumen, not the best idea |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|