move your diff 20mm forward, i redrilled my spring perches, a 25mm bumb stop spacing, and flattern out your seams.
looks like this with flat OE springs.
| auszookers.com http://auszookers.com/forum/ |
|
| 31s on a nt sierra http://auszookers.com/forum/viewtopic.php?f=5&t=20438 |
Page 1 of 1 |
| Author: | smiffkid [ Mon Mar 28, 2011 12:00 pm ] |
| Post subject: | 31s on a nt sierra |
what needs to be done to get them to fit with out rubbing, any help would be appreciated |
|
| Author: | Ben_Sierra [ Mon Mar 28, 2011 12:43 pm ] |
| Post subject: | Re: 31s on a nt sierra |
Body lift and/or some guard massaging... |
|
| Author: | alien [ Mon Mar 28, 2011 12:44 pm ] |
| Post subject: | Re: 31s on a nt sierra |
wide-ass rims (cut and flip), 2" spring, 2" body and maybe some firewall massaging. you'd be better off putting WT diffs under it with NT spring spacing on the perches though, that way you get more flex and more width and less chance of the rubber fouling the springs. if you're feeling really game, my preference would be 2" springs and a guard chop rather than a body lift. |
|
| Author: | smiffkid [ Mon Mar 28, 2011 12:45 pm ] |
| Post subject: | Re: 31s on a nt sierra |
its not for my car haha, just for a guy i know will let him know on his options, he was lookin at the 4 inch lift from snake racing |
|
| Author: | atari4x4 [ Mon Mar 28, 2011 12:47 pm ] |
| Post subject: | Re: 31s on a nt sierra |
4" bodylift FTW |
|
| Author: | alien [ Mon Mar 28, 2011 12:48 pm ] |
| Post subject: | Re: 31s on a nt sierra |
atari4x4 wrote: 4" bodylift FTW
using pine blocks and threadbar right? |
|
| Author: | smiffkid [ Mon Mar 28, 2011 12:54 pm ] |
| Post subject: | Re: 31s on a nt sierra |
chipboard and screws |
|
| Author: | 31zook [ Mon Mar 28, 2011 4:43 pm ] |
| Post subject: | Re: 31s on a nt sierra |
move your diff 20mm forward, i redrilled my spring perches, a 25mm bumb stop spacing, and flattern out your seams. looks like this with flat OE springs.
|
|
| Author: | Ben_Sierra [ Tue Mar 29, 2011 12:15 am ] |
| Post subject: | Re: 31s on a nt sierra |
Cue Gwagensteve with "you don't need lift to run big tyres, look at this guy running 35s with no lift"....  
|
|
| Author: | shakes [ Tue Mar 29, 2011 12:20 am ] |
| Post subject: | Re: 31s on a nt sierra |
Ben_Sierra wrote: Body lift and/or some guard massaging...
The easiest way
Dont forget gearing |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|