auszookers.com
http://auszookers.com/forum/

Lj factory 16 inch rims
http://auszookers.com/forum/viewtopic.php?f=5&t=22069		 Page 1 of 1
Author:  smiffkid [ Wed May 18, 2011 10:05 am ]
Post subject:  Lj factory 16 inch rims
i have a set at the moment that im thinkin of getting chopped and flipped, as there the right width for my tires tho i just need bigger off set,
are these a super rare item, should i try off load these in exchange for some other 16inch rims to suit suzuki
Author:  tanshi [ Wed May 18, 2011 12:02 pm ]
Post subject:  Re: Lj factory 16 inch rims
they arent super rare, but good ones can be hard to come by
Author:  smiffkid [ Wed May 18, 2011 12:56 pm ]
Post subject:  Re: Lj factory 16 inch rims
mine seem pretty straigh, bit rusty but nothing a sand blast wouldn fix,
im just wondering how many people will get upset if i chop them up,
Author:  monley [ Wed May 18, 2011 1:11 pm ]
Post subject:  Re: Lj factory 16 inch rims
could you not just use wheels spacers?
Author:  smiffkid [ Wed May 18, 2011 1:14 pm ]
Post subject:  Re: Lj factory 16 inch rims
but they cost more then getting rims flipped,
Author:  alien [ Wed May 18, 2011 1:20 pm ]
Post subject:  Re: Lj factory 16 inch rims
get any 15x7 off gumtree that fits and flip them... in the meantime restore the LJ rims and put them back on the LJ =)
Author:  smiffkid [ Wed May 18, 2011 1:27 pm ]
Post subject:  Re: Lj factory 16 inch rims
i have 15x7s,
the rims im talking about are the 16x4.5 factory rims, that usualy have bar treas on them,
Author:  alien [ Wed May 18, 2011 1:31 pm ]
Post subject:  Re: Lj factory 16 inch rims
4.5? fark thats narrow =) haha i didnt realise they were that skinny! just go take the wheels off your old BMX... haha

wtf tyre size are you running that wants a 4.5" rim?
Author:  smiffkid [ Wed May 18, 2011 1:35 pm ]
Post subject:  Re: Lj factory 16 inch rims
32x8,
Author:  alien [ Wed May 18, 2011 1:37 pm ]
Post subject:  Re: Lj factory 16 inch rims
is that the mud paddler tractor tyre??? or something else?
Author:  smiffkid [ Wed May 18, 2011 1:39 pm ]
Post subject:  Re: Lj factory 16 inch rims
there could a farm service lug, but yea they do fit on 7 inch rims, but i dont have any 16x7 with zook stud pattern
Author:  alien [ Wed May 18, 2011 1:43 pm ]
Post subject:  Re: Lj factory 16 inch rims
yeah not a common size at all... still, either way hacking up an original LJ rim seems like a shame.
Author:  smiffkid [ Wed May 18, 2011 1:49 pm ]
Post subject:  Re: Lj factory 16 inch rims
well im not gonna buy new rims just to put them on haha, its only to stop them from hitting on the springs, unless some 1 has some un wanted wheel spacers,
Author:  smiffkid [ Wed May 18, 2011 1:50 pm ]
Post subject:  Re: Lj factory 16 inch rims
there the same size as a 750R16, there just 8 inch wide instead of 7.5 they came of split rims,
Author:  303zuke [ Wed May 18, 2011 9:21 pm ]
Post subject:  Re: Lj factory 16 inch rims
If you were going to cut the centres out to flip them, I wouldn't bother putting the old 4.5 rim section back on, I'd find some Toyota 16x5.5 rims (either solids or split rim) and mount those rims to the LJ centres with the original backspacing, which will give you an extra 13mm pos offset.
Author:  smiffkid [ Wed May 18, 2011 10:44 pm ]
Post subject:  Re: Lj factory 16 inch rims
good point, i might have to look into that
Author:  tonyevans [ Wed May 18, 2011 10:49 pm ]
Post subject:  Re: Lj factory 16 inch rims
Don't wreck LJ stuff - Naughty Naughty Naughty - Tony
Author:  smiffkid [ Thu May 19, 2011 11:38 am ]
Post subject:  Re: Lj factory 16 inch rims
sorry tony, but my lj chassis has been chopped down 200mm, custom tray, after markets seat cause the originals are stuffed, corolla motor and gear box as the original doesnt not exist any more
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/