auszookers.com
http://auszookers.com/forum/

noob cv question
http://auszookers.com/forum/viewtopic.php?f=5&t=22413		 Page 1 of 1
Author:  93zook [ Tue May 31, 2011 7:42 am ]
Post subject:  noob cv question
gday guys, just got my new front axles from lowrange but the cv and axle are separate. how do i out them together? is it just a matter of a hit with a mallet??
Author:  boostedbrick [ Tue May 31, 2011 7:51 am ]
Post subject:  Re: noob cv question
They press in with abit of love. Stick the axel on the ground on some wood and put your weight into the CV..
Author:  steak_knife [ Tue May 31, 2011 8:15 am ]
Post subject:  Re: noob cv question
boostedbrick wrote:
They press in with abit of love. Stick the axel on the ground on some wood and put your weight into the CV..


Fill the fucker with Molly grease first!!!!!!!!
Author:  11_evl [ Tue May 31, 2011 8:41 am ]
Post subject:  Re: noob cv question
a trick i use is to fill center with grease, and use the axles non circlip end, to force grease into bell and out of balls from inside.

just my 2c
Author:  royce [ Tue May 31, 2011 8:42 am ]
Post subject:  Re: noob cv question
11_evl wrote:
a trick i use is to fill center with grease, and use the axles non circlip end, to force grease into bell and out of balls from inside.

just my 2c


Now that is thinking!
Author:  11_evl [ Tue May 31, 2011 8:45 am ]
Post subject:  Re: noob cv question
royce wrote:
11_evl wrote:
a trick i use is to fill center with grease, and use the axles non circlip end, to force grease into bell and out of balls from inside.

just my 2c


Now that is thinking!


thanks 8)
Author:  oozuk [ Tue May 31, 2011 8:55 am ]
Post subject:  Re: noob cv question
11_evl wrote:
royce wrote:
11_evl wrote:
a trick i use is to fill center with grease, and use the axles non circlip end, to force grease into bell and out of balls from inside.

just my 2c


Now that is thinking!


thanks 8)


X2 that's what I did with mine
Author:  93zook [ Tue May 31, 2011 9:46 am ]
Post subject:  Re: noob cv question
sweet cheers guys, will do that when i find some time.
Author:  TryHard [ Tue May 31, 2011 10:00 am ]
Post subject:  Re: noob cv question
Give me a yell i can come over give u a hand when ur ready i did my CV's :) kinda tricky to get in the housing
Author:  93zook [ Tue May 31, 2011 10:15 am ]
Post subject:  Re: noob cv question
yep no worries, wont be till next week as this week is pretty full.

do i need to use special grease? or can i use some bearing grease?
Author:  alien [ Tue May 31, 2011 10:18 am ]
Post subject:  Re: noob cv question
http://www.supercheapauto.com.au/online ... escription
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/