Lukezuk wrote:
Well what is the best bull bar for a coily
http://www.auszookers.com/index.php?nam ... ic&t=13126
Personally tested those bar's & can say MUCH stronger than ARB bar's.... 
| auszookers.com http://auszookers.com/forum/ |
|
| What would it cost ?? http://auszookers.com/forum/viewtopic.php?f=5&t=22424 |
Page 1 of 1 |
| Author: | Lukezuk [ Tue May 31, 2011 10:43 am ] |
| Post subject: | What would it cost ?? |
| Author: | zook95 [ Tue May 31, 2011 10:47 am ] |
| Post subject: | Re: What would it cost ?? |
all depends on whhat bull bar you want brand new or used -what brand muds you want -and whhat brand type bl yuo would like cheers luke |
|
| Author: | 89_tintop [ Tue May 31, 2011 10:47 am ] |
| Post subject: | Re: What would it cost ?? |
I would budget between 2500 and 3000forall new stuff.. Less if you can get 2nd hand and do the fitting |
|
| Author: | Gwagensteve [ Tue May 31, 2011 10:48 am ] |
| Post subject: | Re: What would it cost ?? |
*sigh* one million dollars. Or something. It's impossible to answer such a vague question. Work out which parts you want, and ring the sellers of the gear. which bullbar which muds (what size? What rim? whose tyre?) which2" lift? Steve. |
|
| Author: | Lukezuk [ Tue May 31, 2011 10:50 am ] |
| Post subject: | Re: What would it cost ?? |
Well what is the best bull bar for a coily |
|
| Author: | steak_knife [ Tue May 31, 2011 10:55 am ] |
| Post subject: | Re: What would it cost ?? |
Lukezuk wrote: Well what is the best bull bar for a coily
http://www.auszookers.com/index.php?nam ... ic&t=13126 Personally tested those bar's & can say MUCH stronger than ARB bar's....
|
|
| Author: | taszook [ Tue May 31, 2011 10:59 am ] |
| Post subject: | Re: What would it cost ?? |
Wouldn't mind one of those bars myself but it would be expensive by the time it made it to me |
|
| Author: | tmb99 [ Tue May 31, 2011 11:09 am ] |
| Post subject: | Re: What would it cost ?? |
| body lift
http://www.auszookers.com/index.php?nam ... ic&t=15518 Then just cruise 'getting rid of stuff' plenty of muds get listed in there. |
|
| Author: | Lukezuk [ Tue May 31, 2011 11:13 am ] |
| Post subject: | Re: What would it cost ?? |
Thanks everyone you helped me alot lol I'll check getting rid of stuff and see what I can find |
|
| Author: | Lukezuk [ Tue May 31, 2011 11:16 am ] |
| Post subject: | Re: What would it cost ?? |
I like those bull bars and that bash guard and does anyone know where I can get checker plate from cause I would like to remove my siles and put checker plate in it's place |
|
| Author: | boostedbrick [ Tue May 31, 2011 11:21 am ] |
| Post subject: | Re: What would it cost ?? |
Checker plate makes baby jesus cry... But there is a bloke who sells them on ebay from time to time ready to fit up. |
|
| Author: | Lukezuk [ Tue May 31, 2011 11:25 am ] |
| Post subject: | Re: What would it cost ?? |
Really I'll check eBay but I am noticing some rust under them and that's why I want them off |
|
| Author: | Fatzook [ Tue May 31, 2011 11:40 am ] |
| Post subject: | Re: What would it cost ?? |
taszook wrote: Wouldn't mind one of those bars myself but it would be expensive by the time it made it to me
Still cheaper shipped than an ARB bar is before shipping 
|
|
| Author: | taszook [ Tue May 31, 2011 11:46 am ] |
| Post subject: | Re: What would it cost ?? |
This is true haha |
|
| Author: | Mistaria81 [ Tue May 31, 2011 7:51 pm ] |
| Post subject: | Re: What would it cost ?? |
they look nice than the ARB model |
|
| Author: | Lukezuk [ Tue May 31, 2011 10:13 pm ] |
| Post subject: | Re: What would it cost ?? |
What MUDs do you guys prefer overall ?! |
|
| Author: | SierraDan [ Tue May 31, 2011 10:21 pm ] |
| Post subject: | Re: What would it cost ?? |
Everyone is different. Although, I have never heard anyone have something bad to say about bighorns. Good value for money. |
|
| Author: | Lukezuk [ Tue May 31, 2011 10:48 pm ] |
| Post subject: | Re: What would it cost ?? |
Might go for the big horns then |
|
| Author: | Hotshot993 [ Wed Jun 01, 2011 3:54 am ] |
| Post subject: | Re: What would it cost ?? |
Get the eBay lift kit. I read about those, and people on here have them. Some 235 bighorns as your still on p's and look on getting rid of section for coily bullbar. They come up every now and again. Tyres will cost the most. About a grand or something new I think, for bighorns. |
|
| Author: | tanshi [ Wed Jun 01, 2011 4:29 am ] |
| Post subject: | Re: What would it cost ?? |
Or my tires from here http://www.auszookers.com/index.php?nam ... 34&start=0 |
|
| Author: | Lukezuk [ Wed Jun 01, 2011 8:56 am ] |
| Post subject: | Re: What would it cost ?? |
Well those tyres are beast and wow I need to save |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|