probably wont help but here you go anyway
from the front
from the side
| auszookers.com http://auszookers.com/forum/ |
|
| Carby probs http://auszookers.com/forum/viewtopic.php?f=5&t=22525 |
Page 1 of 1 |
| Author: | dusted79 [ Sat Jun 04, 2011 5:54 am ] |
| Post subject: | Carby probs |
Hi all, anyone have links or pictures of g16a carby set-up including all hose placement???? Cant seem to find any pictures to help me out?!? I also bought another carby but is missing the feul in and return inlets??? anyone know if there are other carby's and can I rout the return back on itslf and fit the replacement??? |
|
| Author: | dusted79 [ Sat Jun 04, 2011 7:23 am ] |
| Post subject: | Re: Carby probs |
I have decided to sell the replacement carby and find the same one..... |
|
| Author: | dusted79 [ Sat Jun 04, 2011 9:35 am ] |
| Post subject: | Re: Carby probs |
anyone with info???? |
|
| Author: | alexvitara [ Sat Jun 04, 2011 9:50 am ] |
| Post subject: | Re: Carby probs |
i can take some pics for you tomorrow if you want but i wont be taking to air filter off so it probably wont help much |
|
| Author: | dusted79 [ Sat Jun 04, 2011 11:55 am ] |
| Post subject: | Re: Carby probs |
any help is appreciated, just want to check routing... cheers |
|
| Author: | alexvitara [ Sat Jun 04, 2011 11:57 am ] |
| Post subject: | Re: Carby probs |
ok i'll get a pic tomorrow and post it up |
|
| Author: | AckerDackerly [ Sun Jun 05, 2011 12:00 am ] |
| Post subject: | Re: Carby probs |
Is it a Hitachi? I have the US Spec. vacuum line map: http://www.acksfaq.com/Samvacuumlines.htm (Found by doing a search for vacuum at http://www.acksfaq.com I hope that this helps! |
|
| Author: | dusted79 [ Sun Jun 05, 2011 1:23 am ] |
| Post subject: | Re: Carby probs |
thanks for the link but I am running a Mikuni Carb,, ill check if they have the same setup |
|
| Author: | dusted79 [ Sun Jun 05, 2011 1:38 am ] |
| Post subject: | Re: Carby probs |
Sweet link, almost all the same setup ill def use this link to help... thanks to the yanks... |
|
| Author: | alexvitara [ Sun Jun 05, 2011 10:49 am ] |
| Post subject: | Re: Carby probs |
probably wont help but here you go anyway from the front
from the side
|
|
| Author: | dusted79 [ Sun Jun 05, 2011 11:17 am ] |
| Post subject: | Re: Carby probs |
Spot on champ, what would be the chances of getting a pic of the dizzy rout (mine runs to the 3 pronged doobie on side of carby) and center canister rout (mine runs to same 3 point junction?) is that correct? |
|
| Author: | alexvitara [ Sun Jun 05, 2011 11:25 am ] |
| Post subject: | Re: Carby probs |
dusted79 wrote: Spot on champ, what would be the chances of getting a pic of the dizzy rout (mine runs to the 3 pronged doobie on side of carby) and center canister rout (mine runs to same 3 point junction?) is that correct?
huh? 
|
|
| Author: | dusted79 [ Sun Jun 05, 2011 11:51 am ] |
| Post subject: | Re: Carby probs |
Sorry not sure what the junction is called its on the side closest to the motor and has 3 small hoses running from it, to dizzy, to canister and the other to the brown valve (VSV i think) in your first picture that runs to the EGR |
|
| Author: | alexvitara [ Sun Jun 05, 2011 12:20 pm ] |
| Post subject: | Re: Carby probs |
i'll have a look tomoro for you mate but i dont really understand what you mean |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|