| auszookers.com http://auszookers.com/forum/ |
|
| 1.3 Dizzy http://auszookers.com/forum/viewtopic.php?f=5&t=23235 |
Page 1 of 1 |
| Author: | zooky08 [ Sat Jun 25, 2011 6:48 am ] |
| Post subject: | 1.3 Dizzy |
Were would I be able to buy a brand new distributor for a g13a/b Some kind of parts shop? Suzistore would be my last resort at $350 Don't want a second hand one either Cheers |
|
| Author: | JrZook [ Sat Jun 25, 2011 6:51 am ] |
| Post subject: | Re: Dizzy |
May I ask whta your gripes are with a good secondhand one? |
|
| Author: | zooky08 [ Sat Jun 25, 2011 7:27 am ] |
| Post subject: | Re: Dizzy |
There's nothing wrong with a good secondhand one Just that every things else I have bought for my car has been brand-new |
|
| Author: | SSSIERA [ Sat Jun 25, 2011 7:34 am ] |
| Post subject: | Re: 1.3 Dizzy |
i was in the same postition 2 weeks ago. want33 was able to post me a second hand one from werevere he is over east for 40 dollars inclusive of shipping. suzi store want 250 second hand, wreckers in gnangara whatn 200. but i ended up getting one from the suzishop for free |
|
| Author: | zooky08 [ Sat Jun 25, 2011 7:44 am ] |
| Post subject: | Re: 1.3 Dizzy |
I could get one from jas quite easy But don't want a second hand one If I can't get a new one then I will go to Jas |
|
| Author: | royce [ Sat Jun 25, 2011 7:47 am ] |
| Post subject: | Re: 1.3 Dizzy |
Just get a decent auto electrician to rebuild one for you, I doubt you can buy a truly new one as they arent a high wear item like a starter or alternator |
|
| Author: | shep [ Sat Jun 25, 2011 7:54 am ] |
| Post subject: | Re: 1.3 Dizzy |
i would have thought 350 for a new dizzy was fairly reasonable. |
|
| Author: | zooky08 [ Sat Jun 25, 2011 8:04 am ] |
| Post subject: | Re: 1.3 Dizzy |
Yea I'll pay $350 as last choice If I can get a auto election to rebuilt the dizzy And buy new rotor button and cap cheaper then $350 Then I'll do that |
|
| Author: | want33s [ Sat Jun 25, 2011 8:05 am ] |
| Post subject: | Re: 1.3 Dizzy |
For $350 you can buy A LOT of pre-loved distributors.... |
|
| Author: | JrZook [ Sat Jun 25, 2011 8:15 am ] |
| Post subject: | Re: 1.3 Dizzy |
Dude I believe you should just clean up what you have and use it. Spend the 350 or so on something else. Everything is new hey? Where did you get the brand new engine from? It is very very likely that the suzisport one is just a recon'd unit not a brand spanker. |
|
| Author: | skyman [ Sat Jun 25, 2011 8:20 am ] |
| Post subject: | Re: 1.3 Dizzy |
If your keen on shopping on eBay in the U.S. there have been a lot of new old stock parts hitting the auctions lately, some in stores too.I would have a look. Posting one from wherever they are to you should not be too bad since they are so small. |
|
| Author: | zooky08 [ Sat Jun 25, 2011 8:31 am ] |
| Post subject: | Re: 1.3 Dizzy |
JrZook wrote: Dude I believe you should just clean up what you have and use it. Spend the 350 or so on something else. Everything is new hey? Where did you get the brand new engine from? What I have is bugged
It is very very likely that the suzisport one is just a recon'd unit not a brand spanker. No my engine isn't new but has been rebuilt I'll just get a second hand one nd buy some new bits for it |
|
| Author: | oozuk [ Sat Jun 25, 2011 11:39 am ] |
| Post subject: | Re: 1.3 Dizzy |
the dizzy's very rarely fail, just get the cleanest s/h one you can find, make sure the mechanical and vac advance units are working, and buy new rotor cap and button and there good as new |
|
| Author: | zooky08 [ Sat Jun 25, 2011 11:45 am ] |
| Post subject: | Re: 1.3 Dizzy |
That's what I'm doing Geting one from jas nd buying new button and cap My dizzy has fail some how hence why I need a nother one |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|