auszookers.com
http://auszookers.com/forum/

Can I cut the top off of a high top so it's normal??
http://auszookers.com/forum/viewtopic.php?f=5&t=23295
Page 1 of 2

Author:  dave91 [ Mon Jun 27, 2011 12:09 am ]
Post subject:  Can I cut the top off of a high top so it's normal??

Just wanting to know if its possible to cut the 'high part' off a high top? I'm guessing that the frame runs through there so i wouldnt be able to, but just wondering :wink:

Dave

Author:  BlueSuzy [ Mon Jun 27, 2011 12:12 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

I wouldnt.

You could possibly cut it off and reweld a normal top, but way too much work.

It would be easier to do a straight full body swap.

Author:  want33s [ Mon Jun 27, 2011 12:43 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

Removing the roof skin from a Hitop and replacing with a tintop is possible but is a lot more work than cutting the whole turret through the pillars.

Author:  RIKSTR [ Mon Jun 27, 2011 1:13 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

What are you trying to achive?

Author:  Ben_Sierra [ Mon Jun 27, 2011 1:17 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

A low top 8)

Author:  Fatzook [ Mon Jun 27, 2011 2:08 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

Dave,

Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back :wink:

Author:  tanshi [ Mon Jun 27, 2011 2:10 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

Fatzook wrote:
Dave,

Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back :wink:


or just soft top it :)

Author:  Gwagensteve [ Mon Jun 27, 2011 2:31 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

At which point you'd still want to do a body swap. Cut the roof off a hardtop and the body gets VERY floppy. There's a lot more strength in a soft top tub around the cowl and B pillar.

There's no way to low-roof a high-roof without cutting up another tub - much easier to do a body swap.



Steve.

Author:  nato78 [ Mon Jun 27, 2011 3:35 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

Leave it high, otherwise you just have another hardtop or soft top. Modified hightops are rare, so you will have something a bit unique

Author:  2stroker [ Mon Jun 27, 2011 5:36 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

nato78 wrote:
Leave it high, otherwise you just have another hardtop or soft top. Modified hightops are rare, so you will have something a bit unique


Thank goodness

Author:  dave91 [ Mon Jun 27, 2011 6:43 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

This is the one i was thinking of
http://www.boostcruising.com/forums/ind ... pic=741960

Author:  tanshi [ Mon Jun 27, 2011 6:48 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

the owner was on here for a while.

he bought my lockright to put in it.

Author:  Ben_Sierra [ Mon Jun 27, 2011 6:54 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

I'd be a bit worried about a Sierra with 2 Million kms on the clock...

Author:  atari4x4 [ Mon Jun 27, 2011 6:57 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

thats Mr_Ron's Hightop

Author:  dave91 [ Mon Jun 27, 2011 7:04 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

is it any good??

Author:  shep [ Mon Jun 27, 2011 7:12 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

dave91 wrote:
is it any good??


has aircon Armsup

Author:  dave91 [ Mon Jun 27, 2011 7:21 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

thats a plus, but i cant picture a sierra's power output with the a/c turned on bahahaha
how hard is it to fix rust?

Author:  ajsr [ Mon Jun 27, 2011 7:23 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

hitops are the coolest model made by a 1000%

Author:  Ben_Sierra [ Mon Jun 27, 2011 7:37 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

ajsr wrote:
hitops are the coolest model made by a 1000%


As long as they don't have the ugly square headlights and the wrong badge ;)



:lol:

Author:  jonno_racing [ Mon Jun 27, 2011 7:40 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

a guy i used to wheel with back when i was like 18 had a well set up high top with a shelf up the top for sleeping bags and stuff... was cool.

Author:  Scrawny [ Mon Jun 27, 2011 7:43 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

tanshi wrote:
Fatzook wrote:
Dave,

Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back :wink:


or just soft top it :)


I seem to remember a certain high top to soft top conversion that went horribly wrong. Just keep it a high top if you buy it

Author:  shep [ Mon Jun 27, 2011 7:45 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

Scrawn wrote:
tanshi wrote:
Fatzook wrote:
Dave,

Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back :wink:


or just soft top it :)


I seem to remember a certain high top to soft top conversion that went horribly wrong. Just keep it a high top if you buy it


was that the islandvitara jobbie

Author:  dave91 [ Mon Jun 27, 2011 7:59 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

i reckon this one looks pretty tank, but it needs a tfer case and some rust fixed though

Author:  Fatzook [ Mon Jun 27, 2011 8:07 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

I like it too! WT diff, transfer and some small rust repairs. Thats a nice short list 8)

Author:  ajsr [ Mon Jun 27, 2011 8:11 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

Ben_Sierra wrote:
ajsr wrote:
hitops are the coolest model made by a 1000%


As long as they don't have the ugly square headlights and the wrong badge ;)



:lol:

racist :no:

Author:  dave91 [ Mon Jun 27, 2011 8:11 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

is it expensive to repair rust? I've got a few mates who are boilermakers, would they be able to fix this kind of thing, or is a specialised type of job?

Author:  Fatzook [ Mon Jun 27, 2011 8:12 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

dave91 wrote:
is it expensive to repair rust? I've got a few mates who are boilermakers, would they be able to fix this kind of thing, or is a specialised type of job?


Easy as. Pics of rust? Where is the rust?

Author:  dave91 [ Mon Jun 27, 2011 8:21 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

no pics yet but ill get some when i look at it. There's a little spot in the bottom corner of the door and one of the wells, and a spot in the drivers floor

Author:  Fatzook [ Mon Jun 27, 2011 8:24 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

Doors are easy to replace ( $100 each) If you repair them they will still need paint.

Any floor rust can be repaired so laong as its not in all of the seams.

Author:  Scrawny [ Mon Jun 27, 2011 8:26 am ]
Post subject:  Re: Can I cut the top off of a high top so it's normal??

shep wrote:
Scrawn wrote:
tanshi wrote:
Fatzook wrote:
Dave,

Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back :wink:


or just soft top it :)


I seem to remember a certain high top to soft top conversion that went horribly wrong. Just keep it a high top if you buy it


was that the islandvitara jobbie


Yep :lol:

Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/