| auszookers.com http://auszookers.com/forum/ |
|
| Coil lift/castor concerns http://auszookers.com/forum/viewtopic.php?f=5&t=23332 |
Page 1 of 1 |
| Author: | mongrelzook [ Tue Jun 28, 2011 12:07 am ] |
| Post subject: | Coil lift/castor concerns |
Is there anyway to solve coil sierra castor movement when lifted. I have 2 inch body and 2 inch coil and want to get higher coil as my 31s starting to hit. Apparently Noone makes higher coils because is stuff up the castor. Dose anyone know where I an get...castor bushes or control arm mounts. As well looking for higher springs and shocks. Called everywhere in Brisbane and no one can help... 
Thanks |
|
| Author: | tanshi [ Tue Jun 28, 2011 12:14 am ] |
| Post subject: | Re: Coil lift/castor concerns |
Do a guard chop? lifting it higher is not always the best option |
|
| Author: | mongrelzook [ Tue Jun 28, 2011 12:44 am ] |
| Post subject: | Re: Coil lift/castor concerns |
Yeah true still not to fussed on whole hacking guards apart... That'll require new flares from jeep...just wanna get wheel lil further forward.might just gt sliders sooner than planed. |
|
| Author: | boostedbrick [ Tue Jun 28, 2011 12:57 am ] |
| Post subject: | Re: Coil lift/castor concerns |
mongrelzook wrote: Yeah true still not to fussed on whole hacking guards apart... That'll require new flares from jeep...just wanna get wheel lil further forward.might just gt sliders sooner than planed.
Just massage it abit with a 2 pounder. Should help out quite abit if your gaurds are still untouched. What do coilys run for a bumpstop? is a spacer an option? |
|
| Author: | Rusho [ Tue Jun 28, 2011 1:04 am ] |
| Post subject: | Re: Coil lift/castor concerns |
Suzisport at lawnton sell castor correction bushes, so do eBay 
|
|
| Author: | mongrelzook [ Tue Jun 28, 2011 1:54 am ] |
| Post subject: | Re: Coil lift/castor concerns |
Should have thought of suzisport. Got their sticker on frt windscreen... Feeling pretty stupid right now. Thanks rusho. Yeah already got ballpein to the inner wheel arch to flatten the sill out. It's mainly the side skirt that rubs. So I'll get rid of that. Yeah they got rubber mount on body to diff from memory so won't make any difference spacing it out. Thanks boosted brick. Off to suzisport during lunch. |
|
| Author: | mongrelzook [ Tue Jun 28, 2011 2:14 am ] |
| Post subject: | Re: Coil lift/castor concerns |
Should have thought of suzisport. Got their sticker on frt windscreen... Feeling pretty stupid right now. Thanks rusho. Yeah already got ballpein to the inner wheel arch to flatten the sill out. It's mainly the side skirt that rubs. So I'll get rid of that. Yeah they got rubber mount on body to diff from memory so won't make any difference spacing it out. Thanks boosted brick. Off to suzisport during lunch. |
|
| Author: | mongrelzook [ Tue Jun 28, 2011 2:19 am ] |
| Post subject: | Re: Coil lift/castor concerns |
Should have thought of suzisport. Got their sticker on frt windscreen... Feeling pretty stupid right now. Thanks rusho. Yeah already got ballpein to the inner wheel arch to flatten the sill out. It's mainly the side skirt that rubs. So I'll get rid of that. Yeah they got rubber mount on body to diff from memory so won't make any difference spacing it out. Thanks boosted brick. $195 suzisport. |
|
| Author: | got_bar_work [ Tue Jun 28, 2011 3:51 am ] |
| Post subject: | Re: Coil lift/castor concerns |
Radius arm flip Or stop being a skirt and get out the angle grinder 
I had 31 on my coily with 30 mm lift and guard chop and it was so stable No need to go higher as u cant get a strut that's long enough anyway |
|
| Author: | mongrelzook [ Tue Jun 28, 2011 4:34 am ] |
| Post subject: | Re: Coil lift/castor concerns |
9 inch??? Nah I'll just make a side rail back bit further and see if need castor bushes after that. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|