Shep.... Anything up to $400 I believe..
He did mine cheaper as I was guinea pig...
It is plug and play once done... I'm sure you could handle it without much hammering...
| auszookers.com http://auszookers.com/forum/ |
|
| wiring http://auszookers.com/forum/viewtopic.php?f=5&t=23370 |
Page 1 of 1 |
| Author: | 4x4zook [ Tue Jun 28, 2011 1:34 pm ] |
| Post subject: | wiring |
hi guys just got a 92 swb sierra with a 97 1.6 fuel injected motor in it. the wiring is not hooked up and im having trouble working it out. ive sat for ages with a wiring diagram and still not quite sure. i have the sierra loom connected so i have lights etc. but i cant get power to the ecu. anyone have a diagram on witch wires from the 1.6 loom i need to join into the sierra loom? ive read you only need about 5 wires hooked up for it to run but witch 5 wires are they =O. cheers |
|
| Author: | want33s [ Tue Jun 28, 2011 8:46 pm ] |
| Post subject: | Re: wiring |
You need power from ignition ON to the two relays. One is fuel pump. One is ECU. If you get stuck send it to Steve at KillaKustomKables. If I had more idea of your location than just Australia I would be able to recommend someone close to you. |
|
| Author: | shep [ Tue Jun 28, 2011 8:59 pm ] |
| Post subject: | Re: wiring |
hay want33s any idea what it is worth to get a loom sorted? |
|
| Author: | 4x4zook [ Tue Jun 28, 2011 9:48 pm ] |
| Post subject: | Re: wiring |
forgot to mention my loom was cut wen it was removed from the vitara but im pretty sure after goin through diagram after diagram ive still got all the wires i need. just dont know were to join into the siera loom. and thanks want33s that put me on the right track i reken |
|
| Author: | remydog05 [ Tue Jun 28, 2011 11:24 pm ] |
| Post subject: | Re: wiring |
shep wrote: hay want33s any idea what it is worth to get a loom sorted?
I have an idea he is on ebay, do a search and send him a PM he will send you a quote. |
|
| Author: | want33s [ Wed Jun 29, 2011 1:01 am ] |
| Post subject: | Re: wiring |
Shep.... Anything up to $400 I believe.. He did mine cheaper as I was guinea pig... It is plug and play once done... I'm sure you could handle it without much hammering...
|
|
| Author: | 4x4zook [ Wed Jun 29, 2011 9:11 am ] |
| Post subject: | Re: wiring |
what coloured wires from the vitara loom need to go to the sierra loom? are they only wires that go from vitara loom the ones from the relays?. so i get power to relays then i shld be on track? i cant work out were to splice in. |
|
| Author: | 4x4zook [ Wed Jun 29, 2011 9:46 am ] |
| Post subject: | Re: wiring |
any1? |
|
| Author: | steak_knife [ Wed Jun 29, 2011 10:04 am ] |
| Post subject: | Re: wiring |
4x4zook wrote: what coloured wires from the vitara loom need to go to the sierra loom? are they only wires that go from vitara loom the ones from the relays?. so i get power to relays then i shld be on track? i cant work out were to splice in.
Vit uses some different color's.. Where are you????? What eng???? |
|
| Author: | Taylor74 [ Wed Jun 29, 2011 10:06 am ] |
| Post subject: | Re: wiring |
Black/white with black/white, thats ign Black/yellow with Black/yellow thats crank if its manual ecu. Violet and think yellow trace is constant power. I sent you a link that should help |
|
| Author: | skyman [ Wed Jun 29, 2011 10:54 am ] |
| Post subject: | Re: wiring |
Simplified schematics. The page http://www.kick-fix.com/ECU/8v-tbi-schematic91to95.jpg Link where I found it. http://www.kick-fix.com/schematics-run.html |
|
| Author: | 4x4zook [ Fri Jul 01, 2011 9:02 am ] |
| Post subject: | Re: wiring |
bit of an update got both relays clicking, f/p priming but with key in the "on" position for about 30 seconds smoke came out my ecu =O. took the cover off the ecu and all still seems to be fine one of the little wires just got a bit hot. so im guessing its shorting out somewere? any ideas |
|
| Author: | 4x4zook [ Fri Jul 01, 2011 11:27 am ] |
| Post subject: | Re: wiring |
ok. got the engine cranking but the wire in the ecu is still getting way to hot. ideas? |
|
| Author: | jonno_racing [ Fri Jul 01, 2011 12:25 pm ] |
| Post subject: | Re: wiring |
dude i would take it to a auto eleci. sorry to be the one to say it. |
|
| Author: | 4x4zook [ Fri Jul 01, 2011 12:45 pm ] |
| Post subject: | Re: wiring |
i new that was comin lol |
|
| Author: | 4x4zook [ Sat Jul 02, 2011 4:07 am ] |
| Post subject: | Re: wiring |
if my f/p isnt connected and the pink wire is just hanging free. wld that cause something in the ecu to draw to much power? |
|
| Author: | barney7779 [ Sat Jul 02, 2011 11:50 am ] |
| Post subject: | Re: wiring |
What color is the wire that is getting hot? What color are the plugs that go into the ECU? Still have copies of all the wiring diagrams that i used so might be able to help you out |
|
| Author: | 4x4zook [ Sun Jul 03, 2011 5:19 am ] |
| Post subject: | Re: wiring |
this is whats getting hot. the plugs are 2 blue plugs. 
|
|
| Author: | 4x4zook [ Sun Jul 03, 2011 6:08 am ] |
| Post subject: | Re: wiring |
ok just checked and have got no spark. will chek dizzy wiring later and hopefully theres a wire not connected causing ecu wire to get hot |
|
| Author: | joe5701 [ Sun Jul 03, 2011 6:21 am ] |
| Post subject: | Re: wiring |
I dont think not having a wire connected will cook a diode in the ecu, more a case of having a wire connected wrong. I aint no expert but I would be taking jonno_racings advice |
|
| Author: | zuk_244 [ Sun Jul 03, 2011 9:45 am ] |
| Post subject: | Re: wiring |
Taylor74 wrote: Black/white with black/white, thats ign
Black/yellow with Black/yellow thats crank if its manual ecu. Violet and think yellow trace is constant power. I sent you a link that should help Mine was White (comp) for constant power and i hooked it to White/Green trace (sierra horn). With it getting hot try to find which pinout that resister goes to and find what wire colour it goes to. Chances are its hooked to a ground/positive it shouldnt be. |
|
| Author: | 4x4zook [ Sun Jul 03, 2011 11:09 am ] |
| Post subject: | Re: wiring |
so the white wire out of the ecu was constant power not the violet/yellow? maybe ill try that |
|
| Author: | 4x4zook [ Sun Jul 03, 2011 11:26 am ] |
| Post subject: | Re: wiring |
bingo! haha thanx for that the diode thingy isnt getting hot anymore and everything still works just gotta try get spark now. thanx |
|
| Author: | 4x4zook [ Sun Jul 03, 2011 1:05 pm ] |
| Post subject: | Re: wiring |
another thing to annoy u guys with is this. is there supposto be a hose from this pipe on the inlet manifold to the intake pipe? 
|
|
| Author: | barney7779 [ Sun Jul 03, 2011 1:46 pm ] |
| Post subject: | Re: wiring |
yes there should be a hose connecting them two pipes White wire is constant 12V violet/yellow is check engine light |
|
| Author: | barney7779 [ Sun Jul 03, 2011 1:48 pm ] |
| Post subject: | Re: wiring |
PM me your email address and i will email the diagram that i used to wire mine up, My comp had the 2 blue plugs aswell |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
