I manage to draw a pic of the size with those dimensions
| auszookers.com http://auszookers.com/forum/ |
|
| 1 liter diff u bolts size?? http://auszookers.com/forum/viewtopic.php?f=5&t=23407 |
Page 1 of 1 |
| Author: | joel [ Wed Jun 29, 2011 11:57 am ] |
| Post subject: | 1 liter diff u bolts size?? |
cant find anyone who supplies them, but can get them made cheap, anyone have the length/diameter etc of them to give the guys the measurements to knock them up? cheers |
|
| Author: | Verm1n [ Wed Jun 29, 2011 8:20 pm ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
Carol springs at wacol QLD they just fab new ones up.. I got get u the dimensions for u this avo but I'm more than possitive someone else on here will tell u before then.. |
|
| Author: | joel [ Wed Jun 29, 2011 9:53 pm ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
Verm1n wrote: Carol springs at wacol QLD
they just fab new ones up.. I got get u the dimensions for u this avo but I'm more than possitive someone else on here will tell u before then.. yeah they are the blokes who im using to fab them, they just need the size. yeah chuck me the size when ya get them! cheers |
|
| Author: | Highway-Star [ Thu Jun 30, 2011 12:23 am ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
Verm1n wrote: Carol springs at wacol QLD
they just fab new ones up.. I got get u the dimensions for u this avo but I'm more than possitive someone else on here will tell u before then.. Just note, when I got them to make me new ones for my LJ's, they are in 1.3 Sierra U-bolt size bar. The 1L/LJ size bar is smaller than anything they keep on shelf. It's no biggy, just had to drill out the U-bolt plates ever so slightly. |
|
| Author: | Verm1n [ Thu Jun 30, 2011 5:50 am ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
I've only got rear ones.. I got 4 new front ones by accident, which I gave to 3cyl.. He will have dimensions for u.. rears are 10mm thick. 140mm height with 80mm of thread width from centre to centre is 80mm Hope that helps |
|
| Author: | joel [ Thu Jun 30, 2011 8:27 am ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
cheers that should be fine! |
|
| Author: | Verm1n [ Thu Jun 30, 2011 8:58 am ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
I manage to draw a pic of the size with those dimensions
|
|
| Author: | joel [ Thu Jun 30, 2011 9:04 am ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
do you reckon the fronts are the same? should i just get 1.3 u bolts and just re drill the plates? they didnt have the sizes of any sierra u bolts. |
|
| Author: | joel [ Fri Jul 01, 2011 3:53 am ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
carols springs has 1liter u bolts in stock, they are just under the lj parts listing. brad your measurements are pretty much spot on, but the front has 2 different size bolts, the measurements you mentioned and one slightly longer each side. cheers |
|
| Author: | Verm1n [ Fri Jul 01, 2011 5:09 am ] |
| Post subject: | Re: 1 liter diff u bolts size?? |
joel wrote: carols springs has 1liter u bolts in stock, they are just under the lj parts listing.
brad your measurements are pretty much spot on, but the front has 2 different size bolts, the measurements you mentioned and one slightly longer each side. cheers yea cause off where they sit.. 1 is alittle wider aswell if I rember right to suit the short side |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|