| auszookers.com http://auszookers.com/forum/ |
|
| uneven lift http://auszookers.com/forum/viewtopic.php?f=5&t=23414 |
Page 1 of 1 |
| Author: | clifford [ Wed Jun 29, 2011 10:47 pm ] |
| Post subject: | uneven lift |
just got my sierra lifted 35mm. but the back is about 60mm. will it sort its self out in time? |
|
| Author: | got_bar_work [ Wed Jun 29, 2011 11:20 pm ] |
| Post subject: | Re: uneven lift |
The old springs might have been sages 30mm to start with Does the car sit level or is it sitting high in the back when u look at it |
|
| Author: | alien [ Wed Jun 29, 2011 11:44 pm ] |
| Post subject: | Re: uneven lift |
some "HD" springs cater for you to be adding weight to the tray and hence are stiffer... you might need to drop a leaf out of the pack. |
|
| Author: | stockman [ Wed Jun 29, 2011 11:46 pm ] |
| Post subject: | Re: uneven lift |
Doesn't take much to raise a zook. When I took my spare rear tyre and seat off the thing jumped up 10mm. |
|
| Author: | mongrelzook [ Wed Jun 29, 2011 11:56 pm ] |
| Post subject: | Re: uneven lift |
Iv had same thing happen. Make a tool box or cage to weigh it Down as both are very handy to have. |
|
| Author: | e36pig [ Thu Jun 30, 2011 3:17 am ] |
| Post subject: | Re: uneven lift |
mine does the same with 2inch lift |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|