auszookers.com • View topic - 1 liter diff u bolts size??

Board index » Talking About Stuff » Suzuki Talk

1 liter diff u bolts size??

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Wed Jun 29, 2011 11:57 am

cant find anyone who supplies them, but can get them made cheap,
anyone have the length/diameter etc of them to give the guys the measurements to knock them up?
cheers

_________________
Sj70 tintop

Verm1n

Joined: Tue Oct 28, 2008 10:30 pm
Posts: 1395
Location: Ipswich

Posted: Wed Jun 29, 2011 8:20 pm

Carol springs at wacol QLD
they just fab new ones up.. I got get u the dimensions for u this avo but I'm more than possitive someone else on here will tell u before then..

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Wed Jun 29, 2011 9:53 pm

Verm1n wrote:

Carol springs at wacol QLD
they just fab new ones up.. I got get u the dimensions for u this avo but I'm more than possitive someone else on here will tell u before then..

yeah they are the blokes who im using to fab them, they just need the size.
yeah chuck me the size when ya get them!
cheers

_________________
Sj70 tintop

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Thu Jun 30, 2011 12:23 am

Verm1n wrote:

Carol springs at wacol QLD
they just fab new ones up.. I got get u the dimensions for u this avo but I'm more than possitive someone else on here will tell u before then..

Just note, when I got them to make me new ones for my LJ's, they are in 1.3 Sierra U-bolt size bar. The 1L/LJ size bar is smaller than anything they keep on shelf. It's no biggy, just had to drill out the U-bolt plates ever so slightly.

_________________
Clearance Hole Technology

Verm1n

Joined: Tue Oct 28, 2008 10:30 pm
Posts: 1395
Location: Ipswich

Posted: Thu Jun 30, 2011 5:50 am

I've only got rear ones.. I got 4 new front ones by accident, which I gave to 3cyl.. He will have dimensions for u..
rears are 10mm thick.
140mm height with 80mm of thread
width from centre to centre is 80mm

Hope that helps

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Thu Jun 30, 2011 8:27 am

cheers
that should be fine!

_________________
Sj70 tintop

Verm1n

Joined: Tue Oct 28, 2008 10:30 pm
Posts: 1395
Location: Ipswich

Posted: Thu Jun 30, 2011 8:58 am

I manage to draw a pic of the size with those dimensions

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Thu Jun 30, 2011 9:04 am

do you reckon the fronts are the same?
should i just get 1.3 u bolts and just re drill the plates?
they didnt have the sizes of any sierra u bolts.

_________________
Sj70 tintop

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Fri Jul 01, 2011 3:53 am

carols springs has 1liter u bolts in stock, they are just under the lj parts listing.
brad your measurements are pretty much spot on, but the front has 2 different size bolts, the measurements you mentioned and one slightly longer each side.
cheers

_________________
Sj70 tintop

Verm1n

Joined: Tue Oct 28, 2008 10:30 pm
Posts: 1395
Location: Ipswich

Posted: Fri Jul 01, 2011 5:09 am

joel wrote:

yea cause off where they sit.. 1 is alittle wider aswell if I rember right to suit the short side

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 540 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum