auszookers.com
http://auszookers.com/forum/

stupid question
http://auszookers.com/forum/viewtopic.php?f=5&t=23656
Page 1 of 1

Author:  strutts [ Thu Jul 07, 2011 11:31 pm ]
Post subject:  stupid question

wheres the engine numbers a on 1.6 motor? I cant find it!!!

Author:  tanshi [ Thu Jul 07, 2011 11:33 pm ]
Post subject:  Re: stupid question

should be passenger side,
on the sloped bit where the gearbox meets the engine.

Author:  strutts [ Thu Jul 07, 2011 11:33 pm ]
Post subject:  Re: stupid question

sweeet thanks bud ill have a look :)

Author:  strutts [ Thu Jul 07, 2011 11:48 pm ]
Post subject:  Re: stupid question

the only number on there is like 15**CM with a little 3 is that right :/

Author:  zooky08 [ Thu Jul 07, 2011 11:51 pm ]
Post subject:  Re: stupid question

Should be were the bottom bolt hole for the engine to connect to the gear box
On the slope bit

Author:  strutts [ Thu Jul 07, 2011 11:57 pm ]
Post subject:  Re: stupid question

how many numbers should it have? sorry i cant find it. and im tryin to get a rwc for it lol and coz its a 1.6 the old owner didnt give me the engine number :/

Author:  tanshi [ Thu Jul 07, 2011 11:59 pm ]
Post subject:  Re: stupid question

if its a g16 it should start with g16 and then maybe 7-8 numbers?

Author:  strutts [ Fri Jul 08, 2011 12:00 am ]
Post subject:  Re: stupid question

passenger side yeh? the only number i can find is 1590cm3 which is jst the size yeh? lol so hard to find ><

Author:  Reubs [ Fri Jul 08, 2011 12:02 am ]
Post subject:  Re: stupid question

strutts wrote:
how many numbers should it have? sorry i cant find it. and im tryin to get a rwc for it lol and coz its a 1.6 the old owner didnt give me the engine number :/

Get some chalk maybe. It'll be stamped quite faintly.

Look at the big image here...

Author:  zooky08 [ Fri Jul 08, 2011 12:02 am ]
Post subject:  Re: stupid question

Should be 10 numbers/letters for g16
Look on engine just bellow timing plug on gear box

Author:  strutts [ Fri Jul 08, 2011 12:04 am ]
Post subject:  Re: stupid question

its all good i found it. thanks guys!!

Author:  strutts [ Fri Jul 08, 2011 12:09 am ]
Post subject:  Re: stupid question

it was covered in mud hense why i couldnt find it :( lowest now have to pay an extra $200 for another bloody peice of paper coz the douche jst wrote down the old engine number, tried to book in at vicroads and they where like yeh thats wrong. haha fk :(

Author:  chillin24x7 [ Fri Jul 08, 2011 2:01 am ]
Post subject:  Re: stupid question

you shouldnt have to repay as it was the inspector fault for not doing it right in the first place

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/