| Author |
Message |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Mon Jul 11, 2011 6:01 am |
|
|
hey guys i recently broke a transfer case housing and by the time i realised it was too late, high range gears are pretty FUBAR, what i was wondering is if it is possible to use 1l high range gears with the 6.5 low range gears? or will they not fit on the shafts? trying to sort it out with bits i have laying round haha
cheers, mick
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Mon Jul 11, 2011 6:16 am |
|
|
you will need to lathe up both sets and weld em together to do this.....
|
|
|
|
 |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Mon Jul 11, 2011 7:27 am |
|
|
did a little searching and i see what you mean, looks like i have some great paper weights now.
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Mon Jul 11, 2011 10:05 am |
|
zooktastic wrote: did a little searching and i see what you mean, looks like i have some great paper weights now.
Don't the 6.5's have a warranty?
Also, I'm pretty sure the 6.5's replaced every gear in the case, so if your counter shaft is toast (which has one of the high range gears on it) the whole shaft is toast and you'll need a new one anyway.
|
|
|
|
 |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Wed Jul 13, 2011 1:41 am |
|
|
lol do you have the stuff for warranty josh?
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Wed Jul 13, 2011 8:11 am |
|
zooktastic wrote: lol do you have the stuff for warranty josh?
"Suzuki Samurai 6.5:1 Low Range Transfer Case Gears-
Low range gears are critical for technical off-road driving. Our Samurai 6.5 low range gear kit is the highest quality gear set available. Low Range reduction is 6.5 to 1, a whopping 187% lower than stock! High Range reduction is 20%, perfect for the larger 32" and bigger tires. These gears are NOT WELDED or second rate. These are are strong, run quiet and take a huge amount of abuse. This complete kit includes four new precision cut gears, counter shaft, needle bearings, shims, o-ring, gaskets, and input/output seals. Updated front output shaft recommended for tires 31" and bigger (see below). Minor grinding of case is necessary for installation, see instructions link bellow for more details. Lifetime Warranty on gears. Fits 1986-1995 Suzuki Samurai's. Made by Trail-Gear. No cores are required"
Taken from Here
EDIT: Oh and just for everyone's information, it looks like they have 8:1 reduction gears now!
8:1 MEGA Reduction Gears
|
|
|
|
 |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Wed Jul 13, 2011 10:29 am |
|
|
dont you need a reciept to claim?
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Wed Jul 13, 2011 11:00 am |
|
|
No idea, I'd send Sean from lowrange an email and ask him, surely he will know, seems to be nice enough to answer questions.
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Wed Jul 13, 2011 11:15 am |
|
|
Wow 8.1's!
I wonder who will be the first Auszooker to get some.
_________________ Watch out or you'll get sued.
|
|
|
|
 |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Wed Jul 13, 2011 11:59 am |
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Wed Jul 13, 2011 12:05 pm |
|
|
Pretty sure he has 6.5's
I think the 8.1's are a new release.
_________________ Watch out or you'll get sued.
|
|
|
|
 |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Wed Jul 13, 2011 12:14 pm |
|
|
they were out for a while but dissappeared
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Wed Jul 13, 2011 12:27 pm |
|
|
8.1's are oldddd. Rocky road stopped selling them years ago due to "issues".
_________________ Twin charged twin cam twin locked webwheeler
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Wed Jul 13, 2011 12:32 pm |
|
|
Issues with the actual gears or breaking cases?
_________________ Watch out or you'll get sued.
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Wed Jul 13, 2011 12:37 pm |
|
|
The gears were fragile (from memory).
I've never used a set, just recall a lot of complains about them at the time.
_________________ Twin charged twin cam twin locked webwheeler
|
|
|
|
 |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Thu Jul 14, 2011 3:20 am |
|
|
yeah i heard something similar,
|
|
|
|
 |
|