| auszookers.com http://auszookers.com/forum/ |
|
| Jimny Gearbox ( will a sierra one work) http://auszookers.com/forum/viewtopic.php?f=5&t=23758 |
Page 1 of 1 |
| Author: | ianscott2003 [ Mon Jul 11, 2011 9:27 am ] |
| Post subject: | Jimny Gearbox ( will a sierra one work) |
Blew up my gearbox. Wondering if a sierra one is the same?? |
|
| Author: | 89_tintop [ Mon Jul 11, 2011 10:30 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
Will bolt up if you have a g13 engine... Bit am unsure if the shifter will line up with hole in the floor and also whether the jackshaft will fit. |
|
| Author: | joeblow [ Mon Jul 11, 2011 10:34 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
nope. |
|
| Author: | ianscott2003 [ Mon Jul 11, 2011 10:40 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
My car hit a bump and lost all drive. No 4wd or 2wd. Goes into gears but nothing working. I checked it isnt spinning the transfer shaft. I assume it is the gearbox. Wouldnt be the clutch at all? |
|
| Author: | 89_tintop [ Mon Jul 11, 2011 10:41 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
joeblow wrote: nope.
By how much is it out? |
|
| Author: | ianscott2003 [ Mon Jul 11, 2011 10:42 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
It is like the car is in neutral. |
|
| Author: | 89_tintop [ Mon Jul 11, 2011 10:50 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
doesnt sound like a gearbox problem to me |
|
| Author: | ianscott2003 [ Mon Jul 11, 2011 10:51 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
Would it more likely be a blown clutch? |
|
| Author: | Jasen [ Mon Jul 11, 2011 9:12 pm ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
Is ur transfer case in neutral? |
|
| Author: | kirstyandgrace [ Mon Jul 11, 2011 10:00 pm ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
I would look at this first ^^^ |
|
| Author: | FHA57 [ Tue Jul 12, 2011 12:19 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
sounds like a transfer case problem if its in neatral and u can still put ur gearbox into gears and it wont go does i6t make any noises or is it just not in gear? |
|
| Author: | FHA57 [ Tue Jul 12, 2011 12:20 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
if it was a fkd clutch it would smell like shit wen u tryn drive lol and would slip like a bitch |
|
| Author: | joe5701 [ Tue Jul 12, 2011 9:55 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
I checked it isnt spinning the transfer shaft.[/quote] maybe torn the center out of the clutch plate????????? |
|
| Author: | HarryHoudini [ Tue Jul 12, 2011 10:10 am ] |
| Post subject: | Re: Jimny Gearbox ( will a sierra one work) |
Yep,or broken layshaft(or whatever the main shaft into the g/box is called these days). |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|