http://www.suzistore.com.au/shopdisplay ... eel+Drives
| auszookers.com http://auszookers.com/forum/ |
|
| Timing belt tensioner http://auszookers.com/forum/viewtopic.php?f=5&t=23802 |
Page 1 of 1 |
| Author: | zooky08 [ Wed Jul 13, 2011 3:09 am ] |
| Post subject: | Timing belt tensioner |
Okay does any body know where to get the little metal thing that goes in the back of the timming belt tensioner bearing. My engine has chewed it up to pieces, and bent the bolt. It's for a g16a I tried a g13a one but it's a different design and doesn't line up with the bolt hole Cheers |
|
| Author: | steak_knife [ Wed Jul 13, 2011 6:36 am ] |
| Post subject: | Re: Timing belt tensioner |
http://www.suzistore.com.au/shopdisplay ... eel+Drives
|
|
| Author: | zooky08 [ Wed Jul 13, 2011 6:41 am ] |
| Post subject: | Re: Timing belt tensioner |
I've checked nd they don't have it |
|
| Author: | JrZook [ Wed Jul 13, 2011 7:53 am ] |
| Post subject: | Re: Timing belt tensioner |
http://www.auszookers.com/index.php?nam ... rofile=894
|
|
| Author: | zooky08 [ Wed Jul 13, 2011 8:15 am ] |
| Post subject: | Re: Timing belt tensioner |
|
|
| Author: | Jasen [ Wed Jul 13, 2011 9:39 am ] |
| Post subject: | Re: Timing belt tensioner |
Hey Zooky08, I am almost finished my g16a with g13 head and needed one of these. I managed to get a 2nd hand one for $10 from Suzisport Lawnton. Could probably try a wreckers too. |
|
| Author: | zooky08 [ Wed Jul 13, 2011 9:46 am ] |
| Post subject: | Re: Timing belt tensioner |
Is that included postage I just got stuff from suzistore If I new I need one I would of got one Any wreckers around me won't part with one They will want to sell the engine as complete Would it be a bad idea to mod the g13 one to fit? |
|
| Author: | Jasen [ Wed Jul 13, 2011 9:50 am ] |
| Post subject: | Re: Timing belt tensioner |
they charged me $1.10 for postage and it arrived in a business envelope  Then I saw they only put a 60c stamp on it.... I want my 50c back 
I looked at modding the g13 one but it's pretty much completely different. Looking at the g16 plate it's so simple you could prob cut one out of 1mm tin if you were keen lol Edit: I'll try and get a pic of them tomorrow for ya to show the difference between the 2 |
|
| Author: | zooky08 [ Wed Jul 13, 2011 9:57 am ] |
| Post subject: | Re: Timing belt tensioner |
I've got a g13a one and the slide doesn't reach the hole to put the stud in I guess the g13ba are the same I would make one out of 2mm plate but is it really worth it Like 10 bucks you say I don't even have 10 bucks haha |
|
| Author: | zooky08 [ Thu Jul 14, 2011 6:22 am ] |
| Post subject: | Re: Timing belt tensioner |
What actually keeps the belt slipping of the cam gear I've got the tensioner tight as and it still wants to slowly come off when cranky I see it's been rubbing on my timing cover 
|
|
| Author: | royce [ Thu Jul 14, 2011 6:30 am ] |
| Post subject: | Re: Timing belt tensioner |
one of the pulleys is out of alignment |
|
| Author: | zooky08 [ Thu Jul 14, 2011 6:34 am ] |
| Post subject: | Re: Timing belt tensioner |
Most likely will be the tensioner Crank cog and can gear wouldn't be out of alignment unless I've bent the shaft? |
|
| Author: | steak_knife [ Thu Jul 14, 2011 6:40 am ] |
| Post subject: | Re: Timing belt tensioner |
repco sell belt kit's that come with seal's & tensioner.. |
|
| Author: | zooky08 [ Thu Jul 14, 2011 6:42 am ] |
| Post subject: | Re: Timing belt tensioner |
steak_knife wrote: repco sell belt kit's that come with seal's & tensioner.. I got a kit
Belt, tensioner, and two seals but not the metal thing I need Excuse my knowledge but what are the seals for steaky? |
|
| Author: | zooky08 [ Thu Jul 14, 2011 6:44 am ] |
| Post subject: | Re: Timing belt tensioner |
My bad there crank seals |
|
| Author: | steak_knife [ Thu Jul 14, 2011 6:51 am ] |
| Post subject: | Re: Timing belt tensioner |
|
|
| Author: | zooky08 [ Thu Jul 14, 2011 6:55 am ] |
| Post subject: | Re: Timing belt tensioner |
Clearly I wasn't thinking
Time to order this stupid little metal thing |
|
| Author: | fordem [ Thu Jul 14, 2011 12:34 pm ] |
| Post subject: | Re: Timing belt tensioner |
zooky08 wrote: My bad there crank seals
One crank, one cam. |
|
| Author: | zooky08 [ Thu Jul 14, 2011 12:51 pm ] |
| Post subject: | Re: Timing belt tensioner |
fordem wrote: zooky08 wrote: My bad there crank seals One crank, one cam. They can be back ups
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|