| auszookers.com http://auszookers.com/forum/ |
|
| Rear Axle Replacing http://auszookers.com/forum/viewtopic.php?f=5&t=23816 |
Page 1 of 1 |
| Author: | ealfa [ Wed Jul 13, 2011 8:21 am ] |
| Post subject: | Rear Axle Replacing |
Is there any threads up here going threw the process of replacing the rear axles in a vitara ?? |
|
| Author: | Ridge [ Thu Jul 14, 2011 3:03 am ] |
| Post subject: | Re: Rear Axle Replacing |
1. Put the rear diff on jack stands, 2. Take the wheels off 3. disconnect the brake line going into the drum. Use a pipe spanner to do this if you have one. 4. Take the brake drum off, you can use screw drivers to help lever it off. 5. Take the 4 bolts out that attach the drum to the diff. 6. Attach a piece of chain about 60cm long onto the axle stud, use one of the wheel nuts to hold it on. Give it a few yanks to snatch it out. The axle should come out after 3 or 4 pulls |
|
| Author: | ealfa [ Thu Jul 14, 2011 6:17 am ] |
| Post subject: | Re: Rear Axle Replacing |
Ridge wrote: 1. Put the rear diff on jack stands,
2. Take the wheels off 3. disconnect the brake line going into the drum. Use a pipe spanner to do this if you have one. 4. Take the brake drum off, you can use screw drivers to help lever it off. 5. Take the 4 bolts out that attach the drum to the diff. 6. Attach a piece of chain about 60cm long onto the axle stud, use one of the wheel nuts to hold it on. Give it a few yanks to snatch it out. The axle should come out after 3 or 4 pulls thanks mate see how i go , looks like it will be a weekend job!!!! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|