| auszookers.com http://auszookers.com/forum/ |
|
| Gearbox breather Jimny http://auszookers.com/forum/viewtopic.php?f=5&t=23830 |
Page 1 of 1 |
| Author: | jimny_timmy [ Thu Jul 14, 2011 1:18 am ] |
| Post subject: | Gearbox breather Jimny |
Hey guys, making up some diff and gearbox breathers for my Jimny... Found the one on the transfer case but can't find the one on the gearbox... Anyone able to help? Cheers, Tim |
|
| Author: | Scrawny [ Thu Jul 14, 2011 2:22 am ] |
| Post subject: | Re: Gearbox breather Jimny |
Usually up on top by the shifter |
|
| Author: | jimny_timmy [ Thu Jul 14, 2011 3:04 am ] |
| Post subject: | Re: Gearbox breather Jimny |
Scrawn wrote: Usually up on top by the shifter
cheers man |
|
| Author: | zuk85 [ Thu Jul 14, 2011 8:04 am ] |
| Post subject: | Re: Gearbox breather Jimny |
Our jimny already has a extended breather on the gearbox from the factory, its mounted on the firewall left side back of the motor lil plastic breather top. I was stoked only had to do both diff's and transfer, and there is 2 on the transfer there is a actuator or something for the transfer all the electrics and shit. its only a small vacuum hose with a breather on it " think it ws on passenger side back of the trasnfer only really short and hardly noticable with the all the other wires in the way. I recomend extending this also. Just need 3mm i.d silicon vacuum hose can get it cheap on ebay for like$8 p/m. I used about 1.5m I think. ours is a 07 vvt jimny |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|