auszookers.com • View topic - sierra w/t moving front diff forward?

Board index » Talking About Stuff » Suzuki Talk

sierra w/t moving front diff forward?

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Thu Aug 04, 2011 1:03 am

w/t sierra
i want to move the front diff forward,
say 30mm.
looking it today im guessing i have to re drill the perch and the fishplates as well.?
will i have to make the shock absorber mount longer so it is straight as well?
cheers

_________________
Sj70 tintop

boostedbrick

az supporter

Joined: Tue Jun 29, 2010 7:44 am
Posts: 2003
Location: Brisbane
Vehicle: 2018 DMAX

Posted: Thu Aug 04, 2011 1:20 am

You can go to around 50mm before steering binds. I went 40mm the first time I did it, and the shock hit the bump mount by about 2mm(thin body gabriel). Trimming the edge should sort this out.

You can get around 25mm if you drill the perch on the axle. Or you can redrill the spring, this will give you bad caster on fresh springs if you go too far. Used springs that are flatter wont be as bad.

neofitou

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 1088
Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy

Posted: Thu Aug 04, 2011 1:26 am

um.. RUF?

DO IT.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Thu Aug 04, 2011 6:28 am

22mm is THE MAX you can safely move the front diff forward without major mods.
The back of the pitman arm will hit the tie rod and bend it at full compression if you go any further forward.

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Thu Aug 04, 2011 8:42 am

cheers, thanks fellas.

_________________
Sj70 tintop

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Thu Aug 04, 2011 10:52 am

want33s wrote:

22mm is THE MAX you can safely move the front diff forward without major mods.
The back of the pitman arm will hit the tie rod and bend it at full compression if you go any further forward.

Is that with no bumpstop spacing?

I'm at 30mm with 2" on the bumpstop and I'm 99% sure I have no contact.

I know that full RUF (40mm) does contact, by about 5mm.

Steve.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Thu Aug 04, 2011 11:06 am

Gwagensteve wrote:

want33s wrote:

22mm is THE MAX you can safely move the front diff forward without major mods.
The back of the pitman arm will hit the tie rod and bend it at full compression if you go any further forward.

Is that with no bumpstop spacing?

I'm at 30mm with 2" on the bumpstop and I'm 99% sure I have no contact.

I know that full RUF (40mm) does contact, by about 5mm.

Steve.

0-20mm bumpstop extension.

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Thu Aug 04, 2011 11:09 am

im running 50mm bumpstop extensions now, do i have to move them forward?

_________________
Sj70 tintop

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Thu Aug 04, 2011 11:17 am

yep

_________________
mlm

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Thu Aug 04, 2011 11:43 am

my diff is close to 50mm forward. photos are on my old swb when i was working out
bumpstop spacing. every thing is the same on my lwb except for the steering dampener.

tie rod and draglink rub a bit

this is as close as the pitman gets to the drag link
photo dosent show the angles well but the pitman would well and truly smash into the tie rod if allowed to.
stock bumpstop also completely misses the diff and had to be spaced forward as well.

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum