auszookers.com
http://auszookers.com/forum/

rolled my vit
http://auszookers.com/forum/viewtopic.php?f=5&t=24579		 Page 1 of 1
Author:  Grover-91 [ Sat Aug 06, 2011 9:50 pm ]
Post subject:  rolled my vit
hi ive rolled my vit on a hill climb ground under neath gave way n then ssent me on a tumbl way down passenger side roof has slightly caved due to impact and the whole windscreen is cracked all over am sad bout it partner an i came out cleaan apart from my index finger it broke due to me holding the steering wheel when i know i shouldnt of any way i want to fix vit up completely i want to cut roof off and make my own rollcage n use the as aroof is this possible and are there any ideas out there i could use to better my safety please let me know.....photos wil be up sshortly
Author:  Damo [ Sat Aug 06, 2011 10:26 pm ]
Post subject:  Re: rolled my vit
I always thought a soft top 4 door vit would look cool, well, without the top anyway. It sounds like a fair bit of work in any case.

PS, these may be helpful.
Author:  Ruthless [ Sat Aug 06, 2011 11:17 pm ]
Post subject:  Re: rolled my vit
is it a lwb because there is a good body with no rust or dints sitting at my uncles he wants to get rid of and he wouldnt want too much for it
Author:  nato78 [ Sun Aug 07, 2011 12:16 am ]
Post subject:  Re: rolled my vit
:helloo: Pics or it didn't happen
Author:  Grover-91 [ Sun Aug 07, 2011 1:15 am ]
Post subject:  Re: rolled my vit
its swb soft top....pics im still trying to upload
Author:  Grover-91 [ Sun Aug 07, 2011 1:21 am ]
Post subject:  Re: rolled my vit
one of the pics are up im puttin more up
Author:  Grover-91 [ Sun Aug 07, 2011 1:25 am ]
Post subject:  Re: rolled my vit
3rd pic same as first just brightened
Author:  Scrawny [ Sun Aug 07, 2011 2:08 am ]
Post subject:  Re: rolled my vit
Just find another Vit and swap all your bits over. Cages are easier to build for the soft tops too
Author:  alien [ Sun Aug 07, 2011 2:14 am ]
Post subject:  Re: rolled my vit
wow you smushed it good!

definitely look at doing a body swap - at least then you know all about the history of the mechanics of it rather than jumping into an all new vehicle.
Author:  atari4x4 [ Sun Aug 07, 2011 2:14 am ]
Post subject:  Re: rolled my vit
dude, glad you're ok.... that could have been a lot worse!!!

i'd do as scrawn said, grab another vit put your good bits in it & then you could sell the bent off to someone wanting to re-power a sierra as a whole or part it out & get some cash back.

cars can be repaired, lives can't.
Author:  Teracis [ Sun Aug 07, 2011 4:36 am ]
Post subject:  Re: rolled my vit
atari4x4 wrote:
dude, glad you're ok.... that could have been a lot worse!!!

i'd do as scrawn said, grab another vit put your good bits in it & then you could sell the bent off to someone wanting to re-power a sierra as a whole or part it out & get some cash back.

cars can be repaired, lives can't.


:D:D:D
Author:  Grover-91 [ Sun Aug 07, 2011 7:20 am ]
Post subject:  Re: rolled my vit
hey yeah new vit sounds like a good idea it'll be hard to part her out ( 1st car lol ) but it soundds like the better way to do it thanks for the idea scrawn.......SAFETY FIRST wear the seatbelts otherwise you'll regret it thas wat saved us
Author:  Grover-91 [ Sun Aug 07, 2011 7:22 am ]
Post subject:  Re: rolled my vit
any ideas where i can pick up a cheap vit localy we dont have enough coin behind us atm so cheap in good condition is wat im after
Author:  alexvitara [ Sun Aug 07, 2011 7:47 am ]
Post subject:  Re: rolled my vit
that suck man.
at lease everyone is ok and good luck getting into another vitara soon
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/