auszookers.com
http://auszookers.com/forum/

HELP wheres this wire go g16b
http://auszookers.com/forum/viewtopic.php?f=5&t=24584		 Page 1 of 1
Author:  holdenrules [ Sun Aug 07, 2011 1:30 am ]
Post subject:  HELP wheres this wire go g16b
putting my engine back in where does this wire go. help asap would be great. its on the intake side.

Image

Uploaded with ImageShack.us
Author:  11_evl [ Sun Aug 07, 2011 1:41 am ]
Post subject:  Re: HELP wheres this wire go g16b
Looks starter trigger wire to me.
Post a pic if where that wire goes into harness.
Author:  Scrawny [ Sun Aug 07, 2011 2:01 am ]
Post subject:  Re: HELP wheres this wire go g16b
Looks like a round terminal? If it is then temp sender? Is it front or rear of motor?
Author:  holdenrules [ Sun Aug 07, 2011 2:04 am ]
Post subject:  Re: HELP wheres this wire go g16b
It's not the temp sensor already got the right one on there. It's a the middle of the engine really so could be for the front or rear. Could it be a knock sensor? Can't see one on the side of the intake of the block. Only gets power on crank.
Author:  Scrawny [ Sun Aug 07, 2011 2:10 am ]
Post subject:  Re: HELP wheres this wire go g16b
Is the terminal round or flat? AFAIK the G16 doesn't run a knock sensor. Have you got the trigger wire on the starter?
Author:  zooktastic [ Sun Aug 07, 2011 2:15 am ]
Post subject:  Re: HELP wheres this wire go g16b
power steering?
\
Author:  BlueSuzy [ Sun Aug 07, 2011 2:37 am ]
Post subject:  Re: HELP wheres this wire go g16b
11_evl wrote:
Looks starter trigger wire to me.
Post a pic if where that wire goes into harness.


x2, Is it black with yellow stripe? (from memory)?
Author:  TZAR [ Sun Aug 07, 2011 2:46 am ]
Post subject:  Re: HELP wheres this wire go g16b
holdenrules wrote:
Only gets power on crank.


dont you think you just answered your own question with this statement

Would almost certainly be srarter motor. Tell us what colour the wire is and we can help more
Author:  dp87 [ Sun Aug 07, 2011 8:15 am ]
Post subject:  Re: HELP wheres this wire go g16b
looks the same as my starter wire
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/