call me at 9am in the morning bro, i will give u the chassis and vin off the one we have wrecked
| auszookers.com http://auszookers.com/forum/ |
|
| Vitara PS pump - bearing replacement http://auszookers.com/forum/viewtopic.php?f=5&t=24634 |
Page 1 of 1 |
| Author: | Brenno [ Mon Aug 08, 2011 1:48 am ] |
| Post subject: | Vitara PS pump - bearing replacement |
Has anyone ever changed the bearing in their Vitara Power steering pump? I am having trouble finding a part listing. If someone that has a Vitara with Powersteering could send me their chassis number I could then check for a genuine Suzuki replacement. Or, if you have replaced it, where did you get it from. Thanks |
|
| Author: | Brenno [ Mon Aug 08, 2011 8:43 am ] |
| Post subject: | Re: Vitara PS pump - bearing replacement |
Come on fellow az crew,.who can provide their chassis number so I can get a replacememt from suzuki? |
|
| Author: | jonno_racing [ Mon Aug 08, 2011 9:20 am ] |
| Post subject: | Re: Vitara PS pump - bearing replacement |
call me at 9am in the morning bro, i will give u the chassis and vin off the one we have wrecked
|
|
| Author: | HarryHoudini [ Tue Aug 09, 2011 12:18 am ] |
| Post subject: | Re: Vitara PS pump - bearing replacement |
Interested myself,looking to get a seal or bearing(or both) kit for a 1991 Vitara PS box,,i was given a link to a US one in another thread but would prefer to get one locally,there is one Ebay for $160 but that seems a bit pricey.http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT |
|
| Author: | Brenno [ Tue Aug 09, 2011 10:14 pm ] |
| Post subject: | Re: Vitara PS pump - bearing replacement |
Jonno_racing helped me out with the VIN/Chassis number, and Want33's helped me out as well with a screenshot of the suzuki parts listing, However.... I was told by the parts guy that you can't purchase the bearing new. So I will have to pull it off and get one sized up from a bearing supplier. Thanks for those who helped. Cheer |
|
| Author: | Brenno [ Wed Aug 10, 2011 12:28 am ] |
| Post subject: | Re: Vitara PS pump - bearing replacement |
I pulled the pump out to have a looksee. It looks like a very difficult bearing to get out, and from spinning it freely, the bearing seams quite fine, no noise, grip or slop. 
Any ideas on how to get it out. I just went and bought another smaller fan belt, so just incase the pump seizes while I am away next week, I can always get home by removing the old belt and putting on the smaller one, I will just have no power steering. |
|
| Author: | paulv [ Wed Aug 10, 2011 12:47 am ] |
| Post subject: | Re: Vitara PS pump - bearing replacement |
Power steering pumps are often difficult to dissassemble. Chances are you would need to press it apart. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|