does the 93 lwb vitara need the wheel bearing pressed in and out ?????
| auszookers.com http://auszookers.com/forum/ |
|
| vitara front wheel bearing http://auszookers.com/forum/viewtopic.php?f=5&t=24654 |
Page 1 of 1 |
| Author: | peteandliz [ Mon Aug 08, 2011 11:45 am ] |
| Post subject: | vitara front wheel bearing |
does the 93 lwb vitara need the wheel bearing pressed in and out ?????
|
|
| Author: | christover1 [ Mon Aug 08, 2011 12:44 pm ] |
| Post subject: | Re: vitara front wheel bearing |
peteandliz wrote: does the 93 lwb vitara need the wheel bearing pressed in and out ?????
It is the easiest, and safest way. But can be done by various back yard methods. There is lots of topics on here, if you decide to give it a go. I did mine without any presses or special tools, but was wishing I did. (I'm a walking, talking special tool) |
|
| Author: | peteandliz [ Mon Aug 08, 2011 9:19 pm ] |
| Post subject: | Re: vitara front wheel bearing |
lol i am giving it a go today wish me luck just with basic tools i got a mate who can pres it in for me i just wanted to know weather i was gonna wast time trying to get it in myself |
|
| Author: | royce [ Mon Aug 08, 2011 10:33 pm ] |
| Post subject: | Re: vitara front wheel bearing |
youll have more trouble getting the locking nut on and off than the bearing in and out of the hub really |
|
| Author: | Buddies72 [ Mon Aug 08, 2011 11:00 pm ] |
| Post subject: | Re: vitara front wheel bearing |
royce wrote: youll have more trouble getting the locking nut on and off than the bearing in and out of the hub really
Ain't that the truth! I managed to 'break' my breaker bar.... it is a 50yr old sidchrome set (back when they used good quality steel in them) but even so, waited the week or so for the BenT locknut tool and then snapped the breaker.... |
|
| Author: | gvzookdriver [ Mon Aug 08, 2011 11:37 pm ] |
| Post subject: | Re: vitara front wheel bearing |
oh great...... My front wheel bearing is gone in my GV and i have just ordered BenT tool to replace it. all these stories aren't filling me with confidence |
|
| Author: | Fatzook [ Mon Aug 08, 2011 11:49 pm ] |
| Post subject: | Re: vitara front wheel bearing |
I made a 'tool' up for pressing the bearings out of the front hubs on the weekend. So if you guys are in brissy you're more than welcome to swing by and press them out/ in. Can't help with the locking rings though 
|
|
| Author: | tombutt [ Tue Aug 09, 2011 12:06 am ] |
| Post subject: | Re: vitara front wheel bearing |
pete it worked great didnt who would have thought we could use the useless junk from the vitara you wrecked and if anyone needs the bearing lock nut tool i have one you can borrow |
|
| Author: | peteandliz [ Tue Aug 09, 2011 4:21 am ] |
| Post subject: | Re: vitara front wheel bearing |
royce wrote: youll have more trouble getting the locking nut on and off than the bearing in and out of the hub really
nah was a piece of piss getting 1 hub off was a hassle but both are off only 1 sore thumb and a lot of cursing later i am on the home streech now all i gotta do is press the old ones out and the new in and put it all back one bearing fell apart when i pulled the hub off |
|
| Author: | peteandliz [ Tue Aug 09, 2011 4:23 am ] |
| Post subject: | Re: vitara front wheel bearing |
hey fat zook were about are u located ????? |
|
| Author: | peteandliz [ Tue Aug 09, 2011 4:24 am ] |
| Post subject: | Re: vitara front wheel bearing |
hey there ok with a punch and hammer to get undone just watch ur fingers lol |
|
| Author: | gvzookdriver [ Tue Aug 09, 2011 5:02 am ] |
| Post subject: | Re: vitara front wheel bearing |
tombutt wrote: pete it worked great didnt who would have thought we could use the useless junk from the vitara you wrecked and if anyone needs the bearing lock nut tool i have one you can borrow
Damm i should have asked. Where the hell did that special tool thread thingo go  could have used that oh well now i have one too
|
|
| Author: | Fatzook [ Tue Aug 09, 2011 7:21 am ] |
| Post subject: | Re: vitara front wheel bearing |
peteandliz wrote: hey fat zook were about are u located ?????
Everton Hills, North Brisbane. It takes about 5 mins to do them. Pete |
|
| Author: | peteandliz [ Tue Aug 09, 2011 8:01 am ] |
| Post subject: | Re: vitara front wheel bearing |
well i will be going to cabulture tomorow could i stop in and get u to press out my old case and press in my new ones pls |
|
| Author: | peteandliz [ Wed Aug 10, 2011 3:02 am ] |
| Post subject: | Re: vitara front wheel bearing |
a big thanks to fatzook for pressing my bearing thank u so much |
|
| Author: | Fatzook [ Wed Aug 10, 2011 3:46 am ] |
| Post subject: | Re: vitara front wheel bearing |
no worries. 
|
|
| Author: | gvzookdriver [ Wed Aug 10, 2011 6:34 am ] |
| Post subject: | Re: vitara front wheel bearing |
Hey Fat You might be getting a msg from me soon as i might need mine pressed |
|
| Author: | tombutt [ Wed Aug 10, 2011 6:49 am ] |
| Post subject: | Re: vitara front wheel bearing |
they went out easy once we worked out a tool to do it before that we were going how the f******* do you get these out i was just glad the tool has enough deepth to do it with out dropping cv's makes things alot easier |
|
| Author: | gvzookdriver [ Wed Aug 10, 2011 7:08 am ] |
| Post subject: | Re: vitara front wheel bearing |
Oh I can't even drive my car the bearings have fallen apart they were that bad 
|
|
| Author: | Fatzook [ Wed Aug 10, 2011 7:16 am ] |
| Post subject: | Re: vitara front wheel bearing |
gvzookdriver wrote: Oh I can't even drive my car the bearings have fallen apart they were that bad
Well whip the hubs off. It only takes a few minutes to press out old junk and get new ones in.
Also whats happening with the longy? |
|
| Author: | tombutt [ Wed Aug 10, 2011 7:18 am ] |
| Post subject: | Re: vitara front wheel bearing |
mate you could have em pulled apart run over to petes and still enjoy a cold beer tonight |
|
| Author: | gvzookdriver [ Wed Aug 10, 2011 9:35 am ] |
| Post subject: | Re: vitara front wheel bearing |
Yeah I'll try again tomorrow avo I just couldn't get the bottom bolt thing off but have read up on it and will try again and LWB is going ok will get you to do the diffs. But convinced work to allow me to keep it there so I can use works power  n dont annoy everyone with the noise and there is alot of that
Just wish I wasn't so keen to buy one there all coming up for sale now after I got 1 |
|
| Author: | nato78 [ Wed Aug 10, 2011 11:44 am ] |
| Post subject: | Re: vitara front wheel bearing |
Buddies72 wrote: royce wrote: youll have more trouble getting the locking nut on and off than the bearing in and out of the hub really Ain't that the truth! I managed to 'break' my breaker bar.... it is a 50yr old sidchrome set (back when they used good quality steel in them) but even so, waited the week or so for the BenT locknut tool and then snapped the breaker.... Take it down to your local sidchrome dealer, they will replace it for you, sidchrome has a lifetime warranty. My old man broke his breaker and they just replaced it for him, no questions |
|
| Author: | gvzookdriver [ Thu Aug 11, 2011 8:05 am ] |
| Post subject: | Re: vitara front wheel bearing |
Finally got my whole hub off
Hey mr fat when could you pull n press my bearings ??
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|