auszookers.com
http://auszookers.com/forum/

Axle seal front
http://auszookers.com/forum/viewtopic.php?f=5&t=24679		 Page 1 of 1
Author:  mudzookacoatsy [ Tue Aug 09, 2011 7:45 am ]
Post subject:  Axle seal front
Hey all just after some info. Wats the easiest way to take out and put back in ???
Author:  peteandliz [ Tue Aug 09, 2011 8:07 am ]
Post subject:  Re: Axle seal front
pay some one
Author:  nato78 [ Tue Aug 09, 2011 8:13 am ]
Post subject:  Re: Axle seal front
I've just done mine, pretty easy job. Get yourself a workshop manual, makes it heaps easier. I'll post up how I did it when I get home from work.
Author:  bohuler [ Tue Aug 09, 2011 8:19 am ]
Post subject:  Re: Axle seal front
It depends on the car. I have a sierra with free wheeling hubs and its very very easy to do a front axle seal. Infact, i will post up in the next few weeks a full front hub strip down and rebuild tech thread for those who are unsure. Its pretty easy tho :D Just a few simple tools and a bit of taking your time and not loosing any bolts!
Dave
Author:  mudzookacoatsy [ Tue Aug 09, 2011 8:23 am ]
Post subject:  Re: Axle seal front
I've everything apart just need to get seal out and back in
Author:  mnemonix [ Tue Aug 09, 2011 8:34 am ]
Post subject:  Re: Axle seal front
Big ass screw driver to pry it out. Don't scratch the sealing surface in the diff.
Whack a new one in with a soft face hammer. Use a large socket as a punch to drive it in square if need be.
Author:  mudzookacoatsy [ Tue Aug 09, 2011 8:50 am ]
Post subject:  Re: Axle seal front
Thanks mate . With it leaking like that and getting on tha brake disc and pads that would make it pull right under braking cos of the oil on pad and disc. Hope I made sence
Author:  nato78 [ Tue Aug 09, 2011 11:43 am ]
Post subject:  Re: Axle seal front
Sounds like you got it sorted, I did mine exactly the way mnemonix said.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/