| auszookers.com http://auszookers.com/forum/ |
|
| Offset for 31s with 2" BL, 2" spring and WT conversion http://auszookers.com/forum/viewtopic.php?f=5&t=24739 |
Page 1 of 1 |
| Author: | pickle2589 [ Thu Aug 11, 2011 6:34 am ] |
| Post subject: | Offset for 31s with 2" BL, 2" spring and WT conversion |
I am looking to upgrade my tyres to 31/10.5/15 Maxxis Bighorns. Going to need to buy new rims at the same time so I want the offset to be right. Does anyone run a similer setup and can tell me what the minimum offset would be? I suppose I could just go for the largest offset i can get. Any suggestions? |
|
| Author: | SierraDan [ Thu Aug 11, 2011 6:44 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
15x7 -13 |
|
| Author: | Rusho [ Thu Aug 11, 2011 6:55 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
SierraDan wrote: 15x7 -13
x2..got some the other day, they are |
|
| Author: | xedent [ Thu Aug 11, 2011 8:00 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
SierraDan wrote: 15x7 -13
x3 |
|
| Author: | remydog05 [ Thu Aug 11, 2011 9:32 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
Im about to use 15x7 -13 also. The only concern I have is will they fit under the WT flares with 31/10.5 and do they scrub on full lock at all??? Im the same as you, NT spacing with WT diffs and I will run WT flares or Duraflares. I think the next size offset is -22 F100?? Sound right?? |
|
| Author: | Rusho [ Thu Aug 11, 2011 9:41 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
Mine stick out about an inch past the flares |
|
| Author: | zooky08 [ Thu Aug 11, 2011 10:00 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
remydog05 wrote: Im about to use 15x7 -13 also. i have wt diffs with nt spacing, 0 offset with 30 9.5 tyress and i have a good inchand a bit sticking outside wt flares
The only concern I have is will they fit under the WT flares with 31/10.5 and do they scrub on full lock at all??? Im the same as you, NT spacing with WT diffs and I will run WT flares or Duraflares. I think the next size offset is -22 F100?? Sound right?? so id say they wont fit under wt flares |
|
| Author: | SierraDan [ Thu Aug 11, 2011 10:28 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
I have 15x8 -23 with 31's and they stuck about about 2" |
|
| Author: | remydog05 [ Thu Aug 11, 2011 10:17 pm ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
2inch past the flare or the body?? |
|
| Author: | Rusho [ Thu Aug 11, 2011 11:00 pm ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
Flare I reacon |
|
| Author: | pickle2589 [ Sun Aug 14, 2011 2:29 am ] |
| Post subject: | Re: Offset for 31s with 2" BL, 2" spring and WT conversion |
Thanks for the replies. I'll go with the 15x7 -13. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|