| auszookers.com http://auszookers.com/forum/ |
|
| G16b coolant hoses http://auszookers.com/forum/viewtopic.php?f=5&t=24817 |
Page 1 of 1 |
| Author: | canberramav [ Sun Aug 14, 2011 10:02 pm ] |
| Post subject: | G16b coolant hoses |
Hey all, Can anyone help with where the hoses go on my engine? Seems there are a few differences in the G16b setups. Photos here: http://www.auszookers.com/index.php?nam ... &start=120 Cheers |
|
| Author: | mavmitchell [ Tue Aug 16, 2011 11:06 am ] |
| Post subject: | Re: G16b coolant hoses |
Hi, The thermostat housing on the rear of the head looks like its off a baleno or something. You would remove this and block off the whole outlet. The outlet on the intake manifold is connected to the top of the radiator. The outlet at the rear of the water pump goes to the bottom of the radiator. |
|
| Author: | stockman [ Tue Aug 16, 2011 11:12 am ] |
| Post subject: | Re: G16b coolant hoses |
Is it a Baleno head on a Vitara motor or maybe a Baleno motor with a Vitara inlet? I have been looking for a Vitara motor, but have not seen any like that. |
|
| Author: | canberramav [ Tue Aug 16, 2011 7:57 pm ] |
| Post subject: | Re: G16b coolant hoses |
Thanks Stockman Royce figured it out. the mechanic put the housing from my old motor onto this motor. Had be really confused for a while there. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|