auszookers.com
http://auszookers.com/forum/

Corolla engine bolts torque settings.
http://auszookers.com/forum/viewtopic.php?f=5&t=24858		 Page 1 of 1
Author:  bohuler [ Tue Aug 16, 2011 1:44 am ]
Post subject:  Corolla engine bolts torque settings.
I know its not a suzuki thing, but I know a couple of people here have corolla motors in there zooks so thought I'd try here.
My wife's corolla is leaking oil outta the head, so the old man and I are going to pull it down later this week and fix it. I don't have a manual for the car, so all i need is the page from a manual with the torque settings from the head, and all the rest of the shit involved. Its a 4-A-F 1.6 carby motor, kinda hoping that someones corolla manual will have the settings for me :D
Cheers
Dave
Author:  11_evl [ Tue Aug 16, 2011 3:15 am ]
Post subject:  Re: Corolla engine bolts torque settings.
Google is your friend

http://www.fixya.com/cars/t8408839-need_torque_settings
Author:  gypsy [ Tue Aug 16, 2011 5:11 am ]
Post subject:  Re: Corolla engine bolts torque settings.
if u can wait till tonite i can put them up 4 ya
Author:  bohuler [ Tue Aug 16, 2011 5:41 am ]
Post subject:  Re: Corolla engine bolts torque settings.
Thanks heaps for that. Cheers to 11_evl, but I was kinda after that table that give you all the settings, head gaskets and the bits that go with them are ones that I kinda like to set to the correct torque settings, dunno why :lol:
Thanks!
Author:  gypsy [ Tue Aug 16, 2011 5:53 am ]
Post subject:  Re: Corolla engine bolts torque settings.
cylinder head 53nm then 64nm. camshaft bearing cap 13nm. intake manifold 19nm. Exhaust manifold 25nm.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/