| auszookers.com http://auszookers.com/forum/ |
|
| Building a new fuel tank http://auszookers.com/forum/viewtopic.php?f=5&t=24862 |
Page 1 of 1 |
| Author: | jonno_racing [ Tue Aug 16, 2011 6:39 am ] |
| Post subject: | Building a new fuel tank |
well the tank in my zook is now fucked. it only holds 27ish liters and has started to leak again... so thinking about a new one... thinking i could get the plate cut up nice somewhere in port, and just tig up a "box" as it is with something that the fuel pump sits (in tank) in, some mounts, breather and return line and im done? am i missing much? id like to get around 65ltrs that would be sweet. i am over stopping every 250km for fuel on long trips! |
|
| Author: | Ben_Sierra [ Tue Aug 16, 2011 6:56 am ] |
| Post subject: | Re: Building a new fuel tank |
You might want to think about baffles... |
|
| Author: | atari4x4 [ Tue Aug 16, 2011 6:58 am ] |
| Post subject: | Re: Building a new fuel tank |
You might want to think about expansion chambers... |
|
| Author: | Ben_Sierra [ Tue Aug 16, 2011 6:59 am ] |
| Post subject: | Re: Building a new fuel tank |
You might want to think about getting a professional to do it... |
|
| Author: | ball [ Tue Aug 16, 2011 7:02 am ] |
| Post subject: | Re: Building a new fuel tank |
Ben_Sierra wrote: You might want to think about getting a professional to do it...
But only if they accept your concession card |
|
| Author: | ajsr [ Tue Aug 16, 2011 7:07 am ] |
| Post subject: | Re: Building a new fuel tank |
ball wrote: Ben_Sierra wrote: You might want to think about getting a professional to do it... But only if they accept your concession card |
|
| Author: | gypsy [ Tue Aug 16, 2011 7:08 am ] |
| Post subject: | Re: Building a new fuel tank |
ball wrote: Ben_Sierra wrote: You might want to think about getting a professional to do it... But only if they accept your concession card |
|
| Author: | jonno_racing [ Tue Aug 16, 2011 7:08 am ] |
| Post subject: | Re: Building a new fuel tank |
ajsr wrote: ball wrote: Ben_Sierra wrote: You might want to think about getting a professional to do it... But only if they accept your concession card what are you going to do for a sender etc? i was thinking of running the sierra one lengthened to suit.. however does any one know if the one in the forsale section will fit a shorty? |
|
| Author: | ajsr [ Tue Aug 16, 2011 7:14 am ] |
| Post subject: | Re: Building a new fuel tank |
....................... |
|
| Author: | joel [ Tue Aug 16, 2011 7:34 am ] |
| Post subject: | Re: Building a new fuel tank |
jonno_racing wrote: ajsr wrote: ball wrote: Ben_Sierra wrote: You might want to think about getting a professional to do it... But only if they accept your concession card what are you going to do for a sender etc? i was thinking of running the sierra one lengthened to suit.. however does any one know if the one in the forsale section will fit a shorty? well the one i have is for a swb and it fits in a lwb so i would say yes. and if it doesnt it would be a matter of making new mounts. also, most long rane tank are "only" made to fit swb models, as they cant garrantee where the exhaust runs in a lwb. |
|
| Author: | ajsr [ Tue Aug 16, 2011 7:41 am ] |
| Post subject: | Re: Building a new fuel tank |
.................................... |
|
| Author: | joel [ Tue Aug 16, 2011 8:00 am ] |
| Post subject: | Re: Building a new fuel tank |
i reckon it should, because it is the same tank and isnt built any higher, so it wont hit the floor... simple way would be to get him to take all the measurements and just get under ya truck and measure, that will tell ya. but if it doesnt fit, it will be easier to modify an existing tank than make one from scratch. |
|
| Author: | jonno_racing [ Tue Aug 16, 2011 8:38 am ] |
| Post subject: | Re: Building a new fuel tank |
that tank looks identical to the tank we put in superdukis tin top. I will check with tape mesure in morning. if it dosent fit I will make new mounts. |
|
| Author: | Built4thrashing [ Tue Aug 16, 2011 8:39 am ] |
| Post subject: | Re: Building a new fuel tank |
mounts are different between SWB and LWB |
|
| Author: | joel [ Tue Aug 16, 2011 8:45 am ] |
| Post subject: | Re: Building a new fuel tank |
Built4thrashing wrote: mounts are different between SWB and LWB
if thats the case, its an easy fix. but i didnt have to change mine. |
|
| Author: | stocker [ Tue Aug 16, 2011 9:41 am ] |
| Post subject: | Re: Building a new fuel tank |
why don't you see if you can adapt something up from another model. like a 60 Series or an MQ Pootrol, they both have 60 something litre tanks |
|
| Author: | joel [ Tue Aug 16, 2011 9:50 am ] |
| Post subject: | Re: Building a new fuel tank |
fatzook uses a 90's model rodeo from memory. |
|
| Author: | Fatzook [ Tue Aug 16, 2011 9:56 am ] |
| Post subject: | Re: Building a new fuel tank |
joel wrote: fatzook uses a 90's model rodeo from memory.
Yor memory has more holes than a colinder 90's Jackaroo Jut it would be an epic mission to get that into any sierra thats not a tray back ute. |
|
| Author: | joel [ Tue Aug 16, 2011 9:59 am ] |
| Post subject: | Re: Building a new fuel tank |
Fatzook wrote: joel wrote: fatzook uses a 90's model rodeo from memory. Yor memory has more holes than a colinder 90's Jackaroo Jut it would be an epic mission to get that into any sierra thats not a tray back ute. hahahahah lol, i was close. |
|
| Author: | stocker [ Tue Aug 16, 2011 10:01 am ] |
| Post subject: | Re: Building a new fuel tank |
Fatzook wrote: joel wrote: fatzook uses a 90's model rodeo from memory. Yor memory has more holes than a colinder 90's Jackaroo Jut it would be an epic mission to get that into any sierra thats not a tray back ute. May the 9" Grinder Come in Peace, and leave your car in Pieces... |
|
| Author: | jonno_racing [ Tue Aug 16, 2011 10:02 am ] |
| Post subject: | Re: Building a new fuel tank |
Fatzook wrote: joel wrote: fatzook uses a 90's model rodeo from memory. Yor memory has more holes than a colinder 90's Jackaroo Jut it would be an epic mission to get that into any sierra thats not a tray back ute. thats what superduki has just put in his lwb.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|