auszookers.com
http://auszookers.com/forum/

transfer case bracing
http://auszookers.com/forum/viewtopic.php?f=5&t=25049		 Page 1 of 1
Author:  suzi-fan-22 [ Mon Aug 22, 2011 11:29 am ]
Post subject:  transfer case bracing
i have a wt and dont know how to brace the t case for when i get some reduction i was thinking a rocktoy ring and one of these:
unbrakeable t case cradle

but there are two types and i dont know which one to get ive got a wt case

or should i get a king kong or make my own?

ps i was thinking of running a g16b in the future.

thanks in advance
Author:  suzi-fan-22 [ Mon Aug 22, 2011 11:33 am ]
Post subject:  Re: transfer case bracing
and also who sells the rocktoy rings?
i couldnt find them on lowrange
Author:  sogone [ Mon Aug 22, 2011 11:37 am ]
Post subject:  Re: transfer case bracing
http://www.designfab.com.au/
Author:  JD888 [ Mon Aug 22, 2011 11:47 am ]
Post subject:  Re: transfer case bracing
Not sure that you can use the rocktoy ring with that cradle. I have ordered that cradle and you can use either one unless you already have a rear disconnect. I ordered the disconnect one in case I need it for when I get around to building a buggy in the future. BTW, I will have a rocktoy ring for sale when I receive my cradle.
Author:  suzi-fan-22 [ Mon Aug 22, 2011 11:52 am ]
Post subject:  Re: transfer case bracing
Oh ok are you sure, well If you can use it I'll send you a pm but if not I wont grab it off you
Author:  pyrohamish [ Mon Aug 22, 2011 11:54 am ]
Post subject:  Re: transfer case bracing
does anyone have a dxf for rocktoy ring?
Author:  suzi-fan-22 [ Mon Aug 22, 2011 12:00 pm ]
Post subject:  Re: transfer case bracing
Whats a dxf?
Author:  4wheeljive [ Mon Aug 22, 2011 1:22 pm ]
Post subject:  Re: transfer case bracing
I think you should check out oozuks build thread sorry I can't get the link for you I'm on my phone but he used a rocktoy ring and a mighty kong cradle looks greate
Author:  atari4x4 [ Mon Aug 22, 2011 1:58 pm ]
Post subject:  Re: transfer case bracing
pyrohamish wrote:
does anyone have a dxf for rocktoy ring?


IMO don't be a tight arse, the dude is trying to make a living & it's not like they're expensive. :twisted:

suzi-fan-22 wrote:
Whats a dxf?


.dxf is a type of CAD file.

4wheeljive wrote:
I think you should check out oozuks build thread sorry I can't get the link for you I'm on my phone but he used a rocktoy ring and a mighty kong cradle looks greate


rpmwrx did a sweet job of bracing his transfer case. http://auszookers.com/index.php?name=Fo ... c&start=90

Image

Image

FYI there is a search function & it works quite well for common subjects like this. :wink:
Author:  suzooky87 [ Mon Aug 22, 2011 2:11 pm ]
Post subject:  Re: transfer case bracing
IMO There is nothing wrong with making things yourself. It can be more satisfying sometimes. Just means it will take more time and thinking. Instead of the convenience of just buying something. Although it is good to support a fellow Suzy fan and the suzuki following, afterall if no one buys Suzuki aftermarket products people will stop producing them.
Author:  atari4x4 [ Mon Aug 22, 2011 2:41 pm ]
Post subject:  Re: transfer case bracing
suzooky87 wrote:
IMO There is nothing wrong with making things yourself. It can be more satisfying sometimes. Just means it will take more time and thinking. Instead of the convenience of just buying something. Although it is good to support a fellow Suzy fan and the suzuki following, afterall if no one buys Suzuki aftermarket products people will stop producing them.


but directly asking on a forum for the cad working file for a rocktoy ring is a bit of a dog act IMO. :wink:
Author:  nato78 [ Mon Aug 22, 2011 3:13 pm ]
Post subject:  Re: transfer case bracing
This is how I did mine

http://www.auszookers.com/index.php?nam ... ic&t=21077
Author:  suzi-fan-22 [ Mon Aug 22, 2011 5:36 pm ]
Post subject:  Re: transfer case bracing
Quote:
FYI there is a search function & it works quite well for common subjects like this. :wink:


I know how to use the searh button I put this tread up looking for comparison advice which I could not from the search button also if I was making a thread to begin with why not answer other people's questions while I'm going? And btw I have seen rpm's and oozook's build threads.
But also thanks for your replys
Author:  suzi-fan-22 [ Mon Aug 22, 2011 5:39 pm ]
Post subject:  Re: transfer case bracing
Oh and one important thing I forgot to write is will any of these run with a 2" t case lift?
Author:  suzi-fan-22 [ Wed Aug 24, 2011 9:38 am ]
Post subject:  Re: transfer case bracing
:helloo:
Author:  suzi-fan-22 [ Tue Aug 30, 2011 3:36 am ]
Post subject:  Re: transfer case bracing
i just had a look on low range and they dont sell the orange one any more but does anyone know if the king kong works with a 2'' t case lift?
Author:  tanshi [ Tue Aug 30, 2011 3:47 am ]
Post subject:  Re: transfer case bracing
you will need to mod the floor to run a 2 " transfer lift i believe
Author:  suzi-fan-22 [ Tue Aug 30, 2011 3:56 am ]
Post subject:  Re: transfer case bracing
yer thats fine
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/