| auszookers.com http://auszookers.com/forum/ |
|
| Wa driveshaft balancing? http://auszookers.com/forum/viewtopic.php?f=5&t=25057 |
Page 1 of 1 |
| Author: | Drova [ Mon Aug 22, 2011 10:28 pm ] |
| Post subject: | Wa driveshaft balancing? |
Anyone know a good workshop for driveshaft rebuild/balancing In Perth? I've replacing my unis myself but they keep on failing. |
|
| Author: | masterA [ Tue Aug 23, 2011 1:06 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
Veem Engineering in Naval Base |
|
| Author: | SSSIERA [ Tue Aug 23, 2011 2:03 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
my mate works at veem NOR idk were it is but ill ask him to find out what it will cost for ya. hes only work experience 1 day a week atm but he has signed a contract for an aprentiship in october so i doubt it will get u any discount |
|
| Author: | alien [ Tue Aug 23, 2011 4:37 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
truckline or verriers do it as well. |
|
| Author: | bakerboy [ Tue Aug 23, 2011 6:59 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
X2 on verriers |
|
| Author: | Red89 [ Tue Aug 23, 2011 9:50 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
Final Drive O'Conner |
|
| Author: | Drova [ Tue Aug 23, 2011 11:52 pm ] |
| Post subject: | Re: Wa driveshaft balancing? |
Thanks guys, getting quotes today |
|
| Author: | Drova [ Wed Aug 24, 2011 7:12 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
$200 per shaft rebuild+balance sound fair? |
|
| Author: | alien [ Wed Aug 24, 2011 9:32 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
rebuild include unis? |
|
| Author: | Drova [ Wed Aug 24, 2011 9:39 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
Yeah 2x unis and balance |
|
| Author: | alien [ Wed Aug 24, 2011 10:29 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
thats not too bad dude - who's doing that? i need my front female spliney endy bitty replaced... |
|
| Author: | Drova [ Wed Aug 24, 2011 11:17 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
Driveshafts Australia in Maddington, mate |
|
| Author: | Drova [ Thu Aug 25, 2011 11:23 pm ] |
| Post subject: | Re: Wa driveshaft balancing? |
Ok it turns out that the yokes are Stuffed on rear shaft and will need New ones, so I work out the best way To go $$$ wise. How much and how easy Is it to get a second hand shaft? Thanks Luke |
|
| Author: | alien [ Thu Aug 25, 2011 11:45 pm ] |
| Post subject: | Re: Wa driveshaft balancing? |
should be able to get them pretty easily - if you have some time try www.autoparts.com.au - otherwise suzukishop or suzistore. |
|
| Author: | Drova [ Mon Aug 29, 2011 5:05 am ] |
| Post subject: | Re: Wa driveshaft balancing? |
Am getting them replace the two Yokes that are damaged and it's Only $100 extra, so getting the two Shafts rebuilt = 4x unis replaced 2x balance 2x yokes replaced $500 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|