Put your transfer in neutral, go through the gears, just to rule out the gearbox
| auszookers.com http://auszookers.com/forum/ |
|
| Best option for t case http://auszookers.com/forum/viewtopic.php?f=5&t=25148 |
Page 1 of 1 |
| Author: | Muchea199 [ Fri Aug 26, 2011 2:12 am ] |
| Post subject: | Best option for t case |
Hi guys I blew my t case finally after months of it wining like a banshee Was just wondering what's the best option I rang a wreckers and he has one for 440 with a three month warranty on it Or is it better to buy new gears for it and get someone to split the case and fit it what's more cost affective Cheers guys |
|
| Author: | Muchea199 [ Fri Aug 26, 2011 2:13 am ] |
| Post subject: | Re: Best option for t case |
It's a 1.3 sierra |
|
| Author: | nato78 [ Fri Aug 26, 2011 2:24 am ] |
| Post subject: | Re: Best option for t case |
Pull your case and rebuild it yourself with some reduction gears. It should only take you about a day to pull it apart and rebuild it, $440 from the wrecker is way too expensive, unless it already has reduction gears |
|
| Author: | Reubs [ Fri Aug 26, 2011 2:43 am ] |
| Post subject: | Re: Best option for t case |
Muchea199 wrote: Or is it better to buy new gears for it and get someone to split the case and fit it what's more cost affective
A new gearset is new gears (which gears exactly will depend on the ratio you get) - you will need new bearings if the old case was whining enough to 'go bang'. $440 is an ok price for a case with 3 month warranty. |
|
| Author: | Muchea199 [ Fri Aug 26, 2011 3:05 am ] |
| Post subject: | Re: Best option for t case |
Dosent reduction gears make it slower ? Cos I was happy with it the way it was ? |
|
| Author: | zooky08 [ Fri Aug 26, 2011 3:12 am ] |
| Post subject: | Re: Best option for t case |
So what actually went bang, gears bearings or case? If it's just the bearing and the gears are okay then just buy a rebuild kit |
|
| Author: | nato78 [ Fri Aug 26, 2011 3:14 am ] |
| Post subject: | Re: Best option for t case |
Standard gearing is fine if you will only ever run standard size tyres, and don't want to do any hard or steep offroad driving. Reduction gears will allow you to run taller tyres and crawl tough sections rather than just charging through it where you run a greater risk of breaking something |
|
| Author: | Muchea199 [ Fri Aug 26, 2011 4:42 am ] |
| Post subject: | Re: Best option for t case |
Well I was pulling out of the servo in first then it made a bang and now wen I try to take off it's got a horrible grinding sound and I have no drive but it still works in revers ? |
|
| Author: | Rusho [ Fri Aug 26, 2011 5:09 am ] |
| Post subject: | Re: Best option for t case |
Put your transfer in neutral, go through the gears, just to rule out the gearbox
|
|
| Author: | Muchea199 [ Fri Aug 26, 2011 5:28 am ] |
| Post subject: | Re: Best option for t case |
So if it dosent make a noise wen the t case is in neutral it's deff the t case and if it dose it's the gear box ? |
|
| Author: | tanshi [ Fri Aug 26, 2011 5:38 am ] |
| Post subject: | Re: Best option for t case |
if it makes no noise at all in reverse then i highly doubt its the transfer |
|
| Author: | lump_a_charcoal [ Fri Aug 26, 2011 6:03 am ] |
| Post subject: | Re: Best option for t case |
The last Tcase that I bought cost me $30 off eBay, in perfect working order too. Ask if you get dinner and flowers with the $440 too. |
|
| Author: | 2stroker [ Fri Aug 26, 2011 7:03 am ] |
| Post subject: | Re: Best option for t case |
lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too.
Ask if you get dinner and flowers with the $440 too. Yeah $440 is steep but then again $30 is not indicative of the price that they usually sell for either, that's both ends of the scale. |
|
| Author: | nato78 [ Fri Aug 26, 2011 7:12 am ] |
| Post subject: | Re: Best option for t case |
lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too.
Is that the one you sold me for $90? 
|
|
| Author: | zooktastic [ Fri Aug 26, 2011 7:13 am ] |
| Post subject: | Re: Best option for t case |
what size tyres are on the sierra? |
|
| Author: | lump_a_charcoal [ Fri Aug 26, 2011 7:27 am ] |
| Post subject: | Re: Best option for t case |
nato78 wrote: lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too. Is that the one you sold me for $90? Never!
|
|
| Author: | nato78 [ Fri Aug 26, 2011 7:59 am ] |
| Post subject: | Re: Best option for t case |
lump_a_charcoal wrote: nato78 wrote: lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too. Is that the one you sold me for $90? Never!
|
|
| Author: | Muchea199 [ Sun Aug 28, 2011 2:39 am ] |
| Post subject: | Re: Best option for t case |
I put the transfer case in newtrel and went throo the gears it didn't make the grind but if I put it back in 4x4 or just 2wd it makes it so that's deff t case ? |
|
| Author: | Rusho [ Sun Aug 28, 2011 2:56 am ] |
| Post subject: | Re: Best option for t case |
Unfortunately 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|