| Author |
Message |
Muchea199
Joined: Sat Apr 23, 2011 4:54 am Posts: 42 Location: Landsdale. WA
|
 Posted: Fri Aug 26, 2011 2:12 am |
|
|
Hi guys I blew my t case finally after months of it wining like a banshee
Was just wondering what's the best option
I rang a wreckers and he has one for 440 with a three month warranty on it
Or is it better to buy new gears for it and get someone to split the case and fit it what's more cost affective
Cheers guys
|
|
|
|
 |
Muchea199
Joined: Sat Apr 23, 2011 4:54 am Posts: 42 Location: Landsdale. WA
|
 Posted: Fri Aug 26, 2011 2:13 am |
|
|
|
 |
nato78

az supporter
Joined: Fri Apr 09, 2010 11:30 pm Posts: 1504 Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc
|
 Posted: Fri Aug 26, 2011 2:24 am |
|
|
Pull your case and rebuild it yourself with some reduction gears. It should only take you about a day to pull it apart and rebuild it, $440 from the wrecker is way too expensive, unless it already has reduction gears
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Fri Aug 26, 2011 2:43 am |
|
Muchea199 wrote: Or is it better to buy new gears for it and get someone to split the case and fit it what's more cost affective
A new gearset is new gears (which gears exactly will depend on the ratio you get) - you will need new bearings if the old case was whining enough to 'go bang'.
$440 is an ok price for a case with 3 month warranty.
|
|
|
|
 |
Muchea199
Joined: Sat Apr 23, 2011 4:54 am Posts: 42 Location: Landsdale. WA
|
 Posted: Fri Aug 26, 2011 3:05 am |
|
|
Dosent reduction gears make it slower ? Cos I was happy with it the way it was ?
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Fri Aug 26, 2011 3:12 am |
|
|
So what actually went bang, gears bearings or case?
If it's just the bearing and the gears are okay then just buy a rebuild kit
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
nato78

az supporter
Joined: Fri Apr 09, 2010 11:30 pm Posts: 1504 Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc
|
 Posted: Fri Aug 26, 2011 3:14 am |
|
|
Standard gearing is fine if you will only ever run standard size tyres, and don't want to do any hard or steep offroad driving. Reduction gears will allow you to run taller tyres and crawl tough sections rather than just charging through it where you run a greater risk of breaking something
|
|
|
|
 |
Muchea199
Joined: Sat Apr 23, 2011 4:54 am Posts: 42 Location: Landsdale. WA
|
 Posted: Fri Aug 26, 2011 4:42 am |
|
|
Well I was pulling out of the servo in first then it made a bang and now wen I try to take off it's got a horrible grinding sound and I have no drive but it still works in revers ?
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Fri Aug 26, 2011 5:09 am |
|
Put your transfer in neutral, go through the gears, just to rule out the gearbox 
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
Muchea199
Joined: Sat Apr 23, 2011 4:54 am Posts: 42 Location: Landsdale. WA
|
 Posted: Fri Aug 26, 2011 5:28 am |
|
|
So if it dosent make a noise wen the t case is in neutral it's deff the t case and if it dose it's the gear box ?
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Fri Aug 26, 2011 5:38 am |
|
|
if it makes no noise at all in reverse then i highly doubt its the transfer
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Fri Aug 26, 2011 6:03 am |
|
|
The last Tcase that I bought cost me $30 off eBay, in perfect working order too.
Ask if you get dinner and flowers with the $440 too.
|
|
|
|
 |
2stroker
Joined: Sun Sep 07, 2008 11:30 pm Posts: 2689 Location: North Brisbane
|
 Posted: Fri Aug 26, 2011 7:03 am |
|
lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too.
Ask if you get dinner and flowers with the $440 too.
Yeah $440 is steep but then again $30 is not indicative of the price that they usually sell for either, that's both ends of the scale.
|
|
|
|
 |
nato78

az supporter
Joined: Fri Apr 09, 2010 11:30 pm Posts: 1504 Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc
|
 Posted: Fri Aug 26, 2011 7:12 am |
|
lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too.
Is that the one you sold me for $90? 
|
|
|
|
 |
zooktastic
Joined: Mon May 11, 2009 11:30 pm Posts: 941 Location: west sydney
|
 Posted: Fri Aug 26, 2011 7:13 am |
|
|
what size tyres are on the sierra?
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Fri Aug 26, 2011 7:27 am |
|
nato78 wrote: lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too. Is that the one you sold me for $90? 
Never! 
|
|
|
|
 |
nato78

az supporter
Joined: Fri Apr 09, 2010 11:30 pm Posts: 1504 Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc
|
 Posted: Fri Aug 26, 2011 7:59 am |
|
lump_a_charcoal wrote: nato78 wrote: lump_a_charcoal wrote: The last Tcase that I bought cost me $30 off eBay, in perfect working order too. Is that the one you sold me for $90?  Never! 

|
|
|
|
 |
Muchea199
Joined: Sat Apr 23, 2011 4:54 am Posts: 42 Location: Landsdale. WA
|
 Posted: Sun Aug 28, 2011 2:39 am |
|
|
I put the transfer case in newtrel and went throo the gears it didn't make the grind but if I put it back in 4x4 or just 2wd it makes it so that's deff t case ?
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Sun Aug 28, 2011 2:56 am |
|
Unfortunately 
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
|