auszookers.com
http://auszookers.com/forum/

Jimny issues!
http://auszookers.com/forum/viewtopic.php?f=5&t=25380		 Page 1 of 3
Author:  monley [ Sat Sep 03, 2011 5:28 am ]
Post subject:  Jimny issues!
:helloo: Guys,

I am having a couple of issues with my 09 jimny.

First issue is the starter motor. When i go to start the car, the starter motor will click once, then if i keep holding the key(3-5 seconds) it will then fire. Other times, it will turn over and start first go. Any idea what could be causing this? I don't know much about starter motors, but im guessing it's got some thing to do with the solenoid?

Second issue, is i have a "Malfunctoin inicator light" that keeps coming on, every time i start my car( when it's starts :roll: ). The owner's manual says it's a problem with the "emissions control systems", i had this issue when i put my extractors on, and to fix it, i had to put a pipe from the EGR thing into the last header pipe, then the light stop coming on, but now its back. I would like to fix this my self if i can, cus it's chewing through the fuel some thing bad :? , and i won;t be able to take it to suzuki until Thursday next week. Any idea on what could be cuasing this? The senors on exhuast maybe? :?

Cheers,

Monkey!!
Author:  Fatzook [ Sat Sep 03, 2011 5:35 am ]
Post subject:  Re: Jimny issues!
Whats a soildernoid? :?
Author:  monley [ Sat Sep 03, 2011 5:39 am ]
Post subject:  Re: Jimny issues!
Fatzook wrote:
Whats a soildernoid? :?


My bad!! HTC fail!!! I ment solenoid.
Author:  atari4x4 [ Sat Sep 03, 2011 6:07 am ]
Post subject:  Re: Jimny issues!
so let me clear this up, you want to install these issues after you've got them?

or did you & your HTC fail & find the wrong section. :thefinger:

can you get the error codes out of the ECU to get an idea of what it's spazzing out on, or is that where you got "emissions control" from?

could it be that the little EGR pipe has blocked up with carbon deposits.
Author:  joel [ Sat Sep 03, 2011 6:11 am ]
Post subject:  Re: Jimny issues!
Fatzook wrote:
Whats a soildernoid? :?

its the new bunch of techno recruits we have coming threw the ranks nowadays, unemotional, dont need to feed them, work all day and night.
Author:  monley [ Sat Sep 03, 2011 6:23 am ]
Post subject:  Re: Jimny issues!
atari4x4 wrote:
so let me clear this up, you want to install these issues after you've got them?

or did you & your HTC fail & find the wrong section. :thefinger:

can you get the error codes out of the ECU to get an idea of what it's spazzing out on, or is that where you got "emissions control" from?

could it be that the little EGR pipe has blocked up with carbon deposits.


8O :oops: I swear i put this in suzuki talk :lol: !

I just went to move my car then, it turned over first time and the light has now gone off WTF!!!! :?

P.S. Could a mod please move this thread :helloo: !!! :oops:
Author:  steak_knife [ Sat Sep 03, 2011 9:16 am ]
Post subject:  Re: Jimny issues!
I'd hate to say this, but a coiler would give less trouble... 8O
Author:  dave91 [ Sat Sep 03, 2011 9:29 am ]
Post subject:  Re: Jimny issues!
My integra had the exact same problem. It was the cyp sensor in the dizzy. Apparently it's easier to just replace the whole dizzy.
Author:  dave91 [ Sat Sep 03, 2011 9:30 am ]
Post subject:  Re: Jimny issues!
An my manual had the same corresponding issue
Author:  monley [ Sat Sep 03, 2011 10:59 am ]
Post subject:  Re: Jimny issues!
steak_knife wrote:
I'd hate to say this, but a coiler would give less trouble... 8O


:cry: any idea what could be wrong with the start stekky?
Author:  christover1 [ Sat Sep 03, 2011 11:22 am ]
Post subject:  Re: Jimny issues!
Mud and or poor earths.
MJud and dust eats starter motors.
My vit had a similar issue,
turned out to be crap in the ignition key hole.
Author:  woo603 [ Sat Sep 03, 2011 12:54 pm ]
Post subject:  Re: Jimny issues!
give it a good clean and go from there, pull all the connections off and clean them too. see how you go
Author:  Chop [ Sat Sep 03, 2011 1:14 pm ]
Post subject:  Re: Jimny issues!
monkey wrote:
steak_knife wrote:
I'd hate to say this, but a coiler would give less trouble... 8O


:cry: any idea what could be wrong with the start stekky?


Look at your avatar, and your last outing into the mud pits at the powerlines :wink:
Author:  atari4x4 [ Sat Sep 03, 2011 1:19 pm ]
Post subject:  Re: Jimny issues!
isn't it a new car, take it back under warranty? :wink:


have you pulled the error codes off the ECU yet?
Author:  monley [ Sat Sep 03, 2011 1:36 pm ]
Post subject:  Re: Jimny issues!
atari4x4 wrote:
isn't it a new car, take it back under warranty? :wink:


have you pulled the error codes off the ECU yet?


I will take it back to Suzuki but knowing them they will blame the mods and no haven't pulled the codes of the ecu yet, cus I don't know how :oops:
Author:  steak_knife [ Sat Sep 03, 2011 9:38 pm ]
Post subject:  Re: Jimny issues!
Chop wrote:
monkey wrote:
steak_knife wrote:
I'd hate to say this, but a coiler would give less trouble... 8O


:cry: any idea what could be wrong with the start stekky?


Look at your avatar, and your last outing into the mud pits at the powerlines :wink:


:lol: Bingo!!!!
Author:  monley [ Sun Sep 04, 2011 12:23 am ]
Post subject:  Re: Jimny issues!
Ok I put contact cleaner on the key, as it was rather dirty, took the wires of the starter motor, cleaned them, then it turn over first go armsup

But this error code has got me fuked, it has now away, but no doubt it will he back . :?

Thanks for all your help so far guys. Cheers.
Author:  christover1 [ Sun Sep 04, 2011 12:32 am ]
Post subject:  Re: Jimny issues!
I think the sensor in the exhaust is an O2 sensor.
If faulty, poor economy can be the result.

A guy in our club bought a new one for his Vit, and is very happy now.
He had to search hard for a good price after market one,
cos some where OUCH me bum hurts prices.

My Sierra continually blocked the egr valve path way with soot,
which could happen if your engine runs too rich, too long.
Fixing 02 sensor may fix that??

PS I'm new to EFI and this could be all useless info
Author:  christover1 [ Sun Sep 04, 2011 12:34 am ]
Post subject:  Re: Jimny issues!
try cleaning the sensor or its wires / plugs. May be intermittent because its dirty or loose??
Author:  Moag [ Sun Sep 04, 2011 1:47 am ]
Post subject:  Re: Jimny issues!
monkey wrote:
Ok I put contact cleaner on the key, as it was rather dirty, took the wires of the starter motor, cleaned them, then it turn over first go armsup

But this error code has got me fuked, it has now away, but no doubt it will he back . :?

Thanks for all your help so far guys. Cheers.


Don't know but you might of cleared your codes when you disconnected stuff!
Bridging the little plug thing hanging off your ecu harness may give you an idea, but make sure its the right one and way or you will smoke or reset something or fuke it right and proper!
You may need to go for a couple of drives and flog the shit out of it before the codes come back. Take it to your Suzi dealer so they can plug their scan tool onto it so they can work out what's going on.

This is how I get the basic codes on mine as there are no Suzi dealer within coo wee of here and generic scan tools here don't work.

Image
Author:  jimny_timmy [ Sun Sep 04, 2011 2:08 am ]
Post subject:  Re: Jimny issues!
My egr valve was rooted a while back, caused it to go to limp mode and chew fuel etc. Does it idle rough aswell? My engine light also came on when I fried my starter too.
Author:  monley [ Sun Sep 04, 2011 4:30 am ]
Post subject:  Re: Jimny issues!
jimny_timmy wrote:
My egr valve was rooted a while back, caused it to go to limp mode and chew fuel etc. Does it idle rough aswell? My engine light also came on when I fried my starter too.


Yeh its idleing like crap .
Author:  skyman [ Sun Sep 04, 2011 4:54 am ]
Post subject:  Re: Jimny issues!
Sounds like an EGR issue.
Author:  jimny_timmy [ Sun Sep 04, 2011 7:40 am ]
Post subject:  Re: Jimny issues!
I'd put it at that then... When the starter was fucked it idled ok... Should be covered regardless of mods unless you've put extractors etc on
Author:  monley [ Tue Sep 13, 2011 10:45 am ]
Post subject:  Re: Jimny issues!
Ok it's throwing codes again, but it only seems to do it when it gets below 1/4 of a tank of fuel :crazy: . I did not have time today to find the little plug thing, that's tomorrows job.
Author:  atari4x4 [ Tue Sep 13, 2011 10:52 am ]
Post subject:  Re: Jimny issues!
tank full of water, have you had it submerged lately?

if yes, run the tank low & get a bottle of methylated spirits & pour about 500ml into the tank, metho absorbs the water to some extent
Author:  monley [ Tue Sep 13, 2011 10:54 am ]
Post subject:  Re: Jimny issues!
atari4x4 wrote:
tank full of water, have you had it submerged lately?

if yes, run the tank low & get a bottle of methylated spirits & pour about 500ml into the tank, metho absorbs the water to some extent


Cheers atari, The jimny has done a bit of swimming lately :lol: . I need to refuel in the next 2 days, do i will do it then. Thanks mate!!! :D
Author:  Moag [ Tue Sep 13, 2011 12:12 pm ]
Post subject:  Re: Jimny issues!
It's easy as to do the check engine thingo!!

Some picks :lol:

Some things you might or might not need. Use your imagination.

Image

Two finished versions, the paperclip is the easiest!

Image

Put your head in the passenger side foot well and look up and to the left, behind the glovebox. Its a tiny plug hanging out of that big harness going to the ECU. Put new tool in this one with ignition off.

Image

Don't fuck with the yellow one!!!

Image

Turn ignition on and count flashes.
You can even leave it in (the wire; not your finger) while your driving around, to pick up some of those hard to get codes.
Author:  monley [ Tue Sep 13, 2011 12:19 pm ]
Post subject:  Re: Jimny issues!
Argh cheers moag!!!! I know where those wires are now I think. How do I know what pins I put the little tool thing into ???? I have a bad history with elertrics catching fire. :lol:
Author:  Moag [ Tue Sep 13, 2011 12:24 pm ]
Post subject:  Re: Jimny issues!
If you look at the plug closely you will see that the top row of three only has one pin in it, in the centre; ..... that's the top.

The other end of the tool, goes to the bottom left pin.
Page 1 of 3 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/