| auszookers.com http://auszookers.com/forum/ |
|
| LWB vitara V6 3.8L project http://auszookers.com/forum/viewtopic.php?f=5&t=25437 |
Page 1 of 1 |
| Author: | orangeshannon [ Sun Sep 04, 2011 8:49 am ] |
| Post subject: | LWB vitara V6 3.8L project |
well the other night i had a few mates over and after a few drinks thourght it would be a good idea to put a v6 commo motor into my LWB vitara. i just so happen to have a LWB vitara as a parts car and just so happen to have a commodore v6 engine, box and cut down wiring loom complete engine swap ready to go into a car. i will put range rover diffs under it front and rear would this be possiable. has it been done befor? what would i do about transfer case? |
|
| Author: | buzbox [ Sun Sep 04, 2011 9:07 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
I think you had too many drinks. |
|
| Author: | Bucket [ Sun Sep 04, 2011 9:25 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
V6 has been done. There's a zook I used to work on up in northern Sydney that competed and was running rangie diffs. He ran them with Sierra transfer and Sierra engine. |
|
| Author: | orangeshannon [ Sun Sep 04, 2011 9:40 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
http://www.youtube.com/watch?v=PuzK4vR3dA4 i did find this one on youtube but i wouldnt do a supercharger on mine are you able to get a hold of that guy that u know that has done one i am very interested now all i need is the diffs and sort out the transfer case thats allmost it |
|
| Author: | RIKSTR [ Sun Sep 04, 2011 10:10 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
Look up Tigger on here. You use a Hilux case with adaptors from marks |
|
| Author: | atari4x4 [ Sun Sep 04, 2011 10:23 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
orangeshannon wrote: http://www.youtube.com/watch?v=PuzK4vR3dA4
i did find this one on youtube but i wouldnt do a supercharger on mine are you able to get a hold of that guy that u know that has done one i am very interested now all i need is the diffs and sort out the transfer case thats allmost it build thread right here: http://auszookers.com/index.php?name=Fo ... ic&t=19049 |
|
| Author: | Red89 [ Sun Sep 04, 2011 10:29 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
RIKSTR wrote: Look up Tigger on here. You use a Hilux case with adaptors from marks
x2 but expect to get stung for the adaptor, it aint cheap. |
|
| Author: | joeblow [ Sun Sep 04, 2011 10:48 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
orangeshannon wrote: well the other night i had a few mates over and after a few drinks thourght it would be a good idea to put a v6 commo motor into my........................
Thats the exact scenario that Holden went through with the VN! |
|
| Author: | Fatzook [ Sun Sep 04, 2011 11:38 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
joeblow wrote: orangeshannon wrote: well the other night i had a few mates over and after a few drinks thourght it would be a good idea to put a v6 commo motor into my........................ Thats the exact scenario that Holden went through with the VN! Just before they trauled through the dusty old GMC back catalogue of out dated motors to find said V6. 
|
|
| Author: | atari4x4 [ Sun Sep 04, 2011 11:40 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
Fatzook wrote: joeblow wrote: orangeshannon wrote: well the other night i had a few mates over and after a few drinks thourght it would be a good idea to put a v6 commo motor into my........................ Thats the exact scenario that Holden went through with the VN! Just before they trauled through the dusty old GMC back catalogue of out dated motors to find said V6. IMO the RB30 was their best engine 
|
|
| Author: | Fatzook [ Sun Sep 04, 2011 11:43 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
atari4x4 wrote: Fatzook wrote: joeblow wrote: orangeshannon wrote: well the other night i had a few mates over and after a few drinks thourght it would be a good idea to put a v6 commo motor into my........................ Thats the exact scenario that Holden went through with the VN! Just before they trauled through the dusty old GMC back catalogue of out dated motors to find said V6. IMO the RB30 was their best engine Yep. ANd with some interwebbing you can slap on a RB25DET head and snail for some SERIOUS grunt! But fitting a straight 6 into a vitara would be nigh on impossible 
|
|
| Author: | atari4x4 [ Sun Sep 04, 2011 11:56 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
i was mainly getting to the point of it's really a nissan motor |
|
| Author: | Brett [ Sun Sep 04, 2011 11:57 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
Patrol diffs will line up with lux tcase. rover are off set and gearing is wrong. have you ran a tape over anything yet? |
|
| Author: | Bucket [ Sun Sep 04, 2011 12:00 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
Brett, have you seen the white rangie zook up your way yet?? He competes in toperi and willowglen. It's a Sierra but yeah, that thing runs rangie diffs and standard Sierra case |
|
| Author: | Fatzook [ Sun Sep 04, 2011 12:07 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
Rangie diffs are wide, but not that strong. And Toy diffs have MUCH cheaper and more readily available aftermarket parts than Rangie gear. |
|
| Author: | Brett [ Sun Sep 04, 2011 8:14 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
havent seen the sierra on rovers in real life. Why would you go lux diffs? Vitara diffs are wider. that would be like putting nt sierra diffs under a wt |
|
| Author: | orangeshannon [ Sun Sep 04, 2011 9:00 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
another thread from suzukisport of his build http://www.offroadexpress.co.nz/Forums/ ... hp?t=23622 tell me this do you think that its a great idea? |
|
| Author: | atari4x4 [ Sun Sep 04, 2011 10:17 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
nope, it's a heavy old low tech motor the only good thing about them is they're everywhere & cheap. I'd be looking at the suzuki H27a 2.7l V6 similar power out of less capaicity & less weight. |
|
| Author: | Bucket [ Sun Sep 04, 2011 10:52 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
If you've got the stuff there and really don't have much to lose, just do it. |
|
| Author: | orangeshannon [ Sun Sep 04, 2011 11:18 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
yeh thats the thing i could get that suzuki engine but i allready have allmost all the parts i need i got a complete engine and gearbox with the wiring loom allready cut down to suit v6 conversion and i allready have the car with no engine in it. but i read that build up that that guy did and he said that he used prado chassis which i duno how much that will cost me if i can somehow get new diffs under the vitara chassis would be what i would go for being the cheaper option |
|
| Author: | steve [ Sun Sep 04, 2011 11:30 pm ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
What's the purpose though? Are you planning for it to be road driven, or is it a comp buggy? and if so, what comps will you enter and will you comply with the rules? or is it just for social wheeling bush only? if so, do you have places to take it? |
|
| Author: | orangeshannon [ Mon Sep 05, 2011 1:33 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
im not sure what i would use it for mosdt likly as a bush basher comp would be allright but i dont think i can afford to do that. even better making it road leagel but would cost me alot engineering it all up. would be just for fun thats about all |
|
| Author: | Gwagensteve [ Tue Sep 06, 2011 7:36 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
In what way do you think it will better with a 3.8 v6 in it? Vitaras don't lack power off road, only gearing. If you are a really good fabricator and problem solver, then knock yourself out, but it's going to be about four times more complex and expensive than you imagine now, and might not ever be drivable, legal or reliable enough to ever actually enjoy. and then you'll go on a trip and get spanked on an obstacle by christover. I bench race all sorts of crazy ideas after a few drinks, (somtimes even sober) but not everything you own or can dream up is a good idea just because you own it or can dream it up. Keep it simple I say. Steve |
|
| Author: | orangeshannon [ Tue Sep 06, 2011 8:50 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
yeh i just wanted to make use of that engine i have lieing around and now that i got a car with no engine i was thinking i might as well put them together see how it gose but its a pain in the but as i have to change diffs and sort out a transfer case and adaptor plate for it |
|
| Author: | bohuler [ Tue Sep 06, 2011 9:03 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
Give marks 4wd adaptors a ring and ask to speak to elliot booth and tell him that your a friend of dave's and after mates rates on prices! (elliot was my best man at my wedding ) That way you know your not getting bent over by some random guy working for marks. (your getting bent over and jabbed by my mate ) Naw, seriously, he's a good bloke and will look after you 
Dave |
|
| Author: | Mrhb2u [ Tue Sep 06, 2011 9:07 am ] |
| Post subject: | Re: LWB vitara V6 3.8L project |
buzbox wrote: I think you had too many drinks. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|