auszookers.com
http://auszookers.com/forum/

coily rim off set
http://auszookers.com/forum/viewtopic.php?f=5&t=25504
Page 1 of 1

Author:  tobeszook [ Tue Sep 06, 2011 8:27 am ]
Post subject:  coily rim off set

just wondering what is a good off set for a coily running 30/9.50 with 2''sus and 2'' body

Author:  Rusho [ Tue Sep 06, 2011 8:32 am ]
Post subject:  Re: coily rim off set

I think I had -5's. Tyre sat level with the standard flare

Author:  tobeszook [ Tue Sep 06, 2011 8:36 am ]
Post subject:  Re: coily rim off set

thanks mate i have got a set of 15/7 and i am getting some 30s on the weekend, just tried to measure my off set and i think they are 6 positive

Author:  Rusho [ Tue Sep 06, 2011 8:39 am ]
Post subject:  Re: coily rim off set

.....or was it +5's :oops:

Author:  tobeszook [ Tue Sep 06, 2011 9:09 am ]
Post subject:  Re: coily rim off set

i know f all about off set mate i tried to measure and i got +6 but i probably fucked it up.
what is a good off set!

Author:  DomGat [ Tue Sep 06, 2011 9:39 am ]
Post subject:  Re: coily rim off set

I got -13 with 30x9.5s
Stuck out maybe an inch from standard flares.
Would have preferred to have stayed flush, but got the rubber flares to stay out of trouble.

Author:  tobeszook [ Tue Sep 06, 2011 9:59 am ]
Post subject:  Re: coily rim off set

yeah Ive got some rubber flares in the shed if they do stick out to far

Author:  coily96 [ Tue Sep 06, 2011 10:06 am ]
Post subject:  Re: coily rim off set

I went with -22, then added rubber flares, tyre sits just inline with rubber flare.

Author:  ZookZilla96 [ Tue Sep 06, 2011 10:07 am ]
Post subject:  Re: coily rim off set

ive got -28 wheel bearing crunshers, havent got tyres on them yet but test fitted and they sit level with the edge of the extra flexi-flare. ill be running 31's

Author:  ZookiMonsta [ Tue Sep 06, 2011 11:32 am ]
Post subject:  Re: coily rim off set

I'm not sure what mine are but my mate was running them on his TJ, with 30/9.5s the tyres stick out 60ish mm each side of the standard flairs.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/