Hey mate, have you checked, the transfer case, g-box and engine mounts?
Also, i got oil around, the out put shaft to, NFI why though
| auszookers.com http://auszookers.com/forum/ |
|
| extreme vibration. http://auszookers.com/forum/viewtopic.php?f=5&t=25508 |
Page 1 of 1 |
| Author: | zammit [ Tue Sep 06, 2011 9:42 am ] |
| Post subject: | extreme vibration. |
hey guys im getting an extreme vibration mainly between 80 90 ks i checked the unis and they seem to be ok. i noticed a fair bit of oil around the out put shaft. |
|
| Author: | monley [ Tue Sep 06, 2011 9:45 am ] |
| Post subject: | Re: extreme vibration. |
Hey mate, have you checked, the transfer case, g-box and engine mounts? Also, i got oil around, the out put shaft to, NFI why though
|
|
| Author: | zammit [ Tue Sep 06, 2011 9:47 am ] |
| Post subject: | Re: extreme vibration. |
hey monkey no i havent i only got it today but ill have a squize tomorrow 
|
|
| Author: | MrRocky [ Tue Sep 06, 2011 9:57 am ] |
| Post subject: | Re: extreme vibration. |
broken engine mounts |
|
| Author: | matt91112011 [ Tue Sep 06, 2011 9:59 am ] |
| Post subject: | Re: extreme vibration. |
Are your tyres balanced? Has one of the weights fallen off your wheels? Do you have any mud stuck to your rims? You would be suprised how much vibration either of those issues can make. Cheers Matty |
|
| Author: | zammit [ Tue Sep 06, 2011 11:01 am ] |
| Post subject: | Re: extreme vibration. |
i just got the car today, and havent wheeled it the previous owner got the tyres re balanced and ect. i had a quick look at the mounts the engine ones dont seem to be broken but is there anyway i can be sure. |
|
| Author: | MrRocky [ Tue Sep 06, 2011 11:27 am ] |
| Post subject: | Re: extreme vibration. |
put block of wood under sump and jack it gently up, if the engine mount separates its fucked |
|
| Author: | zammit [ Tue Sep 06, 2011 11:46 am ] |
| Post subject: | Re: extreme vibration. |
thanks Mr rocky ill do it tomorrow night hopefully that solves my problem |
|
| Author: | zammit [ Wed Sep 07, 2011 10:09 am ] |
| Post subject: | Re: extreme vibration. |
turns out it was the uni joint on the cardon shaft between the gear box and transfer, which is what i orginaly expected. should have had a better look |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|