To slow
| auszookers.com http://auszookers.com/forum/ |
|
| Front Axle Housing ?? http://auszookers.com/forum/viewtopic.php?f=5&t=25570 |
Page 1 of 1 |
| Author: | dave1948 [ Thu Sep 08, 2011 3:02 am ] |
| Post subject: | Front Axle Housing ?? |
Is there any differance in front axle / diff housings between a Sierra trayback 1981 model & Sierra soft top 1986 model both are narrow track,i know 1 is drum brakes & the other is disc but that is all bolt on,were diff ratios the same ?? thank's in advance,Dave. |
|
| Author: | Ben_Sierra [ Thu Sep 08, 2011 3:08 am ] |
| Post subject: | Re: Front Axle Housing ?? |
An 81 ute would be a 1.0 litre I'm guessing, and the 86 Softtop a 1.3, so I believe they will have different ratios. (4.1 for the ute and 3.9 for the softtop). |
|
| Author: | zooky08 [ Thu Sep 08, 2011 3:08 am ] |
| Post subject: | Re: Front Axle Housing ?? |
86 model is a NT 1.3 with 3.9 r&p centers I don't no much about tray backs but I'm assuming it will be a 1l and te diffs centers are different nd I'm assume diff housing is different |
|
| Author: | zooky08 [ Thu Sep 08, 2011 3:08 am ] |
| Post subject: | Re: Front Axle Housing ?? |
To slow
|
|
| Author: | Ben_Sierra [ Thu Sep 08, 2011 3:11 am ] |
| Post subject: | Re: Front Axle Housing ?? |
Beaten like a read headed stepchild 
|
|
| Author: | Fatzook [ Thu Sep 08, 2011 3:28 am ] |
| Post subject: | Re: Front Axle Housing ?? |
zooky08 wrote: 86 model is a NT 1.3 with 3.9 r&p centers I don't no much about tray backs but I'm assuming it will be a 1l and te diffs centers are different nd I'm assume diff housing is different
Assumption.... The mother of all fuck ups. 
There is such a thing as an 86 1L NT. I have one.
Dave you need to specify if the 86 vehicle is 1L or 1.3L. If it is 1L the diff is completely interchangable. |
|
| Author: | zooky08 [ Thu Sep 08, 2011 3:33 am ] |
| Post subject: | Re: Front Axle Housing ?? |
Fatzook wrote: zooky08 wrote: 86 model is a NT 1.3 with 3.9 r&p centers I don't no much about tray backs but I'm assuming it will be a 1l and te diffs centers are different nd I'm assume diff housing is different Assumption.... The mother of all fuck ups. There is such a thing as an 86 1L NT. I have one. Dave you need to specify if the 86 vehicle is 1L or 1.3L. If it is 1L the diff is completely interchangable. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|