| auszookers.com http://auszookers.com/forum/ |
|
| G16A question http://auszookers.com/forum/viewtopic.php?f=5&t=25713 |
Page 1 of 1 |
| Author: | Goldnomad [ Sun Sep 11, 2011 8:33 pm ] |
| Post subject: | G16A question |
G'day Folks, I have a 1990 Vitara SWB Auto with a G16A in it. Can anyone tell me what following year G16A's will drop straight in please? That is, would a 1991,1992 etc. model G16A fit? Also, does one out of a manual fit straight on to an auto? I'm looking to buy a spare motor to rebuild for future use and I want to make sure I get the right motor. Thanks in advance. Robert |
|
| Author: | steak_knife [ Mon Sep 12, 2011 9:39 am ] |
| Post subject: | Re: G16A question |
Goldnomad wrote: G'day Folks,
I have a 1990 Vitara SWB Auto with a G16A in it. Can anyone tell me what following year G16A's will drop straight in please? That is, would a 1991,1992 etc. model G16A fit? Also, does one out of a manual fit straight on to an auto? I'm looking to buy a spare motor to rebuild for future use and I want to make sure I get the right motor. Thanks in advance. Robert All the same till you come to the spark's side if it... |
|
| Author: | Goldnomad [ Mon Sep 12, 2011 8:57 pm ] |
| Post subject: | Re: G16A question |
Thanks Steaky, So, when does the Dizzy etc. change? Robert |
|
| Author: | Poita [ Tue Sep 13, 2011 4:28 am ] |
| Post subject: | Re: G16A question |
I bought a head from a G16A to replace my damaged G16A head and the gear on the end of the cam to drive the dizzy was in a different spot. Mine was hard up against the end of the cam, the replacement cam had the gear about an inch from the end. No idea what years though, but something to watch. We had to find another cam. If you can get cam and dizzy together though you will be fine 
|
|
| Author: | Goldnomad [ Tue Sep 13, 2011 9:01 pm ] |
| Post subject: | Re: G16A question |
Thanks Poita Robert |
|
| Author: | Fatzook [ Tue Sep 13, 2011 9:25 pm ] |
| Post subject: | Re: G16A question |
Poita wrote: I bought a head from a G16A to replace my damaged G16A head and the gear on the end of the cam to drive the dizzy was in a different spot.
Mine was hard up against the end of the cam, the replacement cam had the gear about an inch from the end. No idea what years though, but something to watch. We had to find another cam. If you can get cam and dizzy together though you will be fine Was it off a swift perhaps? |
|
| Author: | Fatzook [ Tue Sep 13, 2011 9:26 pm ] |
| Post subject: | Re: G16A question |
steak_knife wrote: Goldnomad wrote: G'day Folks, I have a 1990 Vitara SWB Auto with a G16A in it. Can anyone tell me what following year G16A's will drop straight in please? That is, would a 1991,1992 etc. model G16A fit? Also, does one out of a manual fit straight on to an auto? I'm looking to buy a spare motor to rebuild for future use and I want to make sure I get the right motor. Thanks in advance. Robert All the same till you come to the spark's side if it... Unless its an import G16A, which will be 16v multi point EFI 
|
|
| Author: | Poita [ Tue Sep 13, 2011 11:08 pm ] |
| Post subject: | Re: G16A question |
It was from a guy on here (cant remember his name) and it was from a Vitara. I did question him whether he had ever done a swift engine swap or anything and he said he didn't. Previous owner may have though... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|