| auszookers.com http://auszookers.com/forum/ |
|
| jimny reverse switch http://auszookers.com/forum/viewtopic.php?f=5&t=25758 |
Page 1 of 1 |
| Author: | zooky08 [ Tue Sep 13, 2011 6:17 am ] |
| Post subject: | jimny reverse switch |
im trying to get my reverse lights to work but they seem not to work, all fuses and bulbs are fine, so i pulled the switch of the box to see if it was the switch. is there ment to be some kind of plastic push rod thats in the end of the switch? mine dont seem to have one, if there was ment to be one in it also if i go to push some thing down the hole it start smoking. not sure if i should of done that  
|
|
| Author: | 89_tintop [ Tue Sep 13, 2011 6:57 am ] |
| Post subject: | Re: jimny reverse switch |
There should be some form of a pushrod in it... It looks like it onky has one wire coming out of it? It should have 2. |
|
| Author: | zooky08 [ Tue Sep 13, 2011 7:18 am ] |
| Post subject: | Re: jimny reverse switch |
That's what I thought. It does have two wires, just that one is hidden under the other. Any way was faulty switch. I swapped it over with a Sierra one nd now I ghave reverse lights 
|
|
| Author: | steak_knife [ Tue Sep 13, 2011 7:21 am ] |
| Post subject: | Re: jimny reverse switch |
89_tintop wrote: There should be some form of a pushrod in it...
It looks like it onky has one wire coming out of it? It should have 2.  bingo....
|
|
| Author: | zooky08 [ Tue Sep 13, 2011 7:40 am ] |
| Post subject: | Re: jimny reverse switch |
I've change the plug on the Sierra one so it can plug into the jimny plug but now lights are staying on? No wires are touching each other |
|
| Author: | stocker [ Tue Sep 13, 2011 8:15 am ] |
| Post subject: | Re: jimny reverse switch |
Spray WD40 up the guts of the Jimny one, test it with a Multimeter. sometimes they just get gunked up |
|
| Author: | zooky08 [ Tue Sep 13, 2011 8:19 am ] |
| Post subject: | Re: jimny reverse switch |
stocker wrote: Spray WD40 up the guts of the Jimny one, test it with a Multimeter. sometimes they just get gunked up that could work, but i dont have no push rod to go in it, there was none when i pulled it out.
also it started smoking and sparking when i tryied to push some thing down the hole. |
|
| Author: | steak_knife [ Tue Sep 13, 2011 9:31 am ] |
| Post subject: | Re: jimny reverse switch |
zooky08 wrote: stocker wrote: Spray WD40 up the guts of the Jimny one, test it with a Multimeter. sometimes they just get gunked up that could work, but i dont have no push rod to go in it, there was none when i pulled it out.also it started smoking and sparking when i tryied to push some thing down the hole. 
|
|
| Author: | zooky08 [ Tue Sep 13, 2011 9:42 am ] |
| Post subject: | Re: jimny reverse switch |
steak_knife wrote: zooky08 wrote: stocker wrote: Spray WD40 up the guts of the Jimny one, test it with a Multimeter. sometimes they just get gunked up that could work, but i dont have no push rod to go in it, there was none when i pulled it out.also it started smoking and sparking when i tryied to push some thing down the hole. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|