| auszookers.com http://auszookers.com/forum/ |
|
| g16b dizzy vs. g16b MPFI coil http://auszookers.com/forum/viewtopic.php?f=5&t=25948 |
Page 1 of 1 |
| Author: | sogone [ Mon Sep 19, 2011 11:10 am ] |
| Post subject: | g16b dizzy vs. g16b MPFI coil |
Google yields me no results, or conflicting results at best. I wanna know the differences between the g16b dizzy out of a vitara compared to the g16b MPFI coil pack out of a baleno. Vs power. Vs torque Are they single cam or twin cams? I've recently brought PJ.zooks conversion which is a g16b coil pack mpfi out of a baleno and i'm trying to do some research on it (before it gets here) to find out it's specs and the like. |
|
| Author: | Teracis [ Mon Sep 19, 2011 11:14 am ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
They are both SOHC, as far as my research went the coilpack engine is slightly better, but the conversion is a bit harder to accomplish. Also you generally find baleno engines with far less km's on it. I got a whole baleno with 80,000km for $1040 delivered. |
|
| Author: | sogone [ Mon Sep 19, 2011 11:16 am ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
The conversions already been accomplished as it comes with everything. So that part doesn't worry me. When I googled it I found a few pages saying that the baleno came out with a 1.6 DOHC MPFI coil pack motor... But looking at the motor, there's only enough 'head' for one cam. |
|
| Author: | Teracis [ Mon Sep 19, 2011 11:21 am ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
sogone wrote: The conversions already been accomplished as it comes with everything. So that part doesn't worry me. When I googled it I found a few pages saying that the baleno came out with a 1.6 DOHC MPFI coil pack motor... But looking at the motor, there's only enough 'head' for one cam.
Yeah, afaik they had a 1.8 dohc in some models but all the G16's are SOHC. I could be wrong about that though but a lot of the baleno information on the net seems to confuse the different models i.e.1.6 and the 1.8 e.t.c. It's good that you've got the whole conversion done already, hopefully it slots straight in, I know I've got a lot of work ahead of me for mine! |
|
| Author: | sogone [ Mon Sep 19, 2011 11:23 am ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
Just gotta hope he has a spare minute this week to get it to the depot to get it sent. |
|
| Author: | Fatzook [ Mon Sep 19, 2011 11:23 am ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
No DOHC G16B's in australia. Infact I have never heard of that variant of G16B before. |
|
| Author: | sogone [ Mon Sep 19, 2011 11:30 am ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
I Pmed you fatz |
|
| Author: | Fatzook [ Mon Sep 19, 2011 11:56 am ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
Teracis wrote: sogone wrote: The conversions already been accomplished as it comes with everything. So that part doesn't worry me. When I googled it I found a few pages saying that the baleno came out with a 1.6 DOHC MPFI coil pack motor... But looking at the motor, there's only enough 'head' for one cam. Yeah, afaik they had a 1.8 dohc in some models but all the G16's are SOHC. I could be wrong about that though but a lot of the baleno information on the net seems to confuse the different models i.e.1.6 and the 1.8 e.t.c. It's good that you've got the whole conversion done already, hopefully it slots straight in, I know I've got a lot of work ahead of me for mine! The J18a DOHC came out in the GTX balenos. |
|
| Author: | Rhinoman [ Mon Sep 19, 2011 12:00 pm ] |
| Post subject: | Re: g16b dizzy vs. g16b MPFI coil |
They will both be 95bhp SOHC motors, the later Balenos were supposed to have 10% more torque gained by a bunch of different mods including a mild tweak to the cam timing, a slight increase in compression and changes to the ignition and EFI. The multipack 1.6 Baleno EFI uses a 16-bit dual core processor rather than the Vits 8-bit core. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|